Skip to the page
Home Campus
Start free

Scale Drawings

Make an accurate scale drawing with ruler, protractor and compasses from given lengths and angles, then measure it to find a length or an angle that cannot be measured directly.

Before you start

  • In Secondary 2 you met map scales: the scale 1:n1 : n means that 1 unit on the map represents nn of the same units on the ground, and "1 cm to 2 km" is the scale 1:200 0001 : 200\,000. Actual distance = map distance × n\times\ n, and map distance = actual distance ÷ n\div\ n, in the same unit.
  • A map is the ground reduced with scale factor 1n\frac{1}{n} (Secondary 2, Enlargement and Reduction), so angles do not change: every angle on it is the real angle.
  • In Secondary 1 you constructed triangles: "Always sketch first", "Leave the construction arcs showing", and measure lengths to the nearest 0.10.1 cm and angles to the nearest degree.

What a Scale Drawing Is For

Nobody lays a tape measure across a lake or climbs a tower to measure its height. Instead, measure what can be measured on the ground (a length along the bank, an angle with an instrument), make an accurate drawing to scale with ruler, protractor and compasses, and measure the unknown length or angle on the drawing.

A scale drawing

A scale drawing is an accurate drawing of a real object in which every length is the real length divided by the same number nn: the scale is 1:n1 : n.

Drawing length = real length ÷ n\div\ n, and real length = drawing length × n\times\ n, both in the same unit.

The drawing has the same shape as the real object: every angle on it is equal to the real angle.

Choosing a scale. A question usually gives the scale. When you choose it, choose one that makes the drawing fit the paper and as large as it can be (a larger drawing is more accurate), with easy numbers.

A hall 3636 m by 2424 m is to be drawn on a page 1515 cm wide. At 1:3001 : 300, 3636 m =3600= 3600 cm becomes 3600÷300=123600 \div 300 = 12 cm, and 2424 m becomes 88 cm: it fits, with room for the labels. At 1:2001 : 200 it would be 1818 cm wide, too wide for the page.

Making a Scale Drawing

The steps

Step 1. Sketch the object by hand, with the real lengths and angles marked on it.

Step 2. Change each real length into a drawing length in cm.

Step 3. Construct the drawing with ruler, protractor and compasses, as in Secondary 1. Leave the arcs showing.

Step 4. Label the drawing with the real lengths and write the scale under it.

Step 5. Measure the length you want to the nearest 0.10.1 cm, or the angle to the nearest degree.

Step 6. Change a measured length back into a real length. Write the answer with ≈\approx, since it is measured.

Step 3 uses the constructions of Secondary 1. Which one depends on what is given:

What is givenHow to construct it
Three sidesDraw one side; arcs of the other two lengths about its ends cross at the third corner
Two sides and the angle between themDraw one side and the angle at the end where the two sides meet; mark off the second side along the new arm
Two angles and a sideFind the third angle first if it is needed; draw the side and the angles at its two ends; the arms cross at the third corner
A right angleA protractor at 90∘90^{\circ}, or a set square against a ruler

For example, a field with sides 100100 m, 8080 m and 6060 m, drawn at 1:20001 : 2000, has sides 10 000÷2000=510\,000 \div 2000 = 5 cm, 44 cm and 33 cm. Draw AB=5AB = 5 cm; arcs of 44 cm about AA and 33 cm about BB cross at CC.

A scale drawing at 1 : 2000 of a field ABC with AB = 100 m, AC = 80 m and BC = 60 m, made with arcs of 4 cm about A and 3 cm about BABC100 m60 m80 mScale 1 : 2000

How accurate is a scale drawing?

Even a careful drawing is a little out. As in Secondary 1, a length measured on your drawing is right if it is within 0.20.2 cm of the answer, and an angle within 2∘2^{\circ}.

In the real unit the range is nn times as large: at 1:20001 : 2000, 0.20.2 cm on the drawing is 0.2×2000=4000.2 \times 2000 = 400 cm =4= 4 m on the ground. Angles are the same on the drawing as on the ground, so an angle is still right within 2∘2^{\circ}.

The drawings on this page

The drawings on this page are not to the real size: do not measure the screen. Construct each drawing on paper and measure your own drawing.

Example 1: A triangular field

A triangular field ABCABC has AB=120AB = 120 m, AC=90AC = 90 m and ∠BAC=75∘\angle BAC = 75^{\circ}. Using a scale of 1:20001 : 2000, make an accurate scale drawing of the field. Use your drawing to find the length of BCBC and the size of ∠ABC\angle ABC. (The drawing below is not to the real size: construct on paper and measure your own drawing.)

A scale drawing at 1 : 2000 of a triangular field ABC with AB = 120 m, AC = 90 m and angle BAC = 75°; BC is unknownABC120 m? m90 m75°Scale 1 : 2000

Solution

Change to drawing lengths: AB=120AB = 120 m =12 000= 12\,000 cm, and 12 000÷2000=612\,000 \div 2000 = 6 cm. AC=90AC = 90 m =9000= 9000 cm, and 9000÷2000=4.59000 \div 2000 = 4.5 cm.

Two sides and the angle between them are given. Draw AB=6AB = 6 cm. At AA draw an angle of 75∘75^{\circ}, and mark CC on its arm 4.54.5 cm from AA. Join BCBC.

Measure: BC≈6.5BC \approx 6.5 cm and ∠ABC≈42∘\angle ABC \approx 42^{\circ}.

Change back: BC≈6.5×2000=13 000BC \approx 6.5 \times 2000 = 13\,000 cm =130= 130 m.

Any length from 6.36.3 cm to 6.76.7 cm is right, which is 126126 m to 134134 m; any angle from 40∘40^{\circ} to 44∘44^{\circ}.

The scale drawing at 1 : 2000 of the field ABC with BC and angle ABC measuredABC120 m≈ 130 m90 m75°≈ 42°Scale 1 : 2000

Check (not the method the question asks for): the cosine rule (lesson 6.5) gives BC2=1202+902−2×120×90×cos⁡75∘,BC^{2} = 120^{2} + 90^{2} - 2 \times 120 \times 90 \times \cos 75^{\circ}\text{,} so BC=130.0BC = 130.0 m, and then ∠ABC=42.0∘\angle ABC = 42.0^{\circ}. The drawing agrees.

BC≈130BC \approx 130 m and ∠ABC≈42∘\angle ABC \approx 42^{\circ}.

A calculation is only a check

When a question says "make a scale drawing" and "use your drawing to find", the answer is the one you measure. A calculation (Pythagoras' theorem, trigonometry, the sine or cosine rule) may check it, but it does not replace the drawing.

A Course on Bearings

In lesson 7.2 you met bearings: the bearing of BB from AA is measured at AA, clockwise from the north line at AA to ABAB, and is written with three figures. In a scale drawing, draw a north line at every point where the course turns (north lines are parallel), and draw each bearing from it with the protractor.

Example 2: A ship's course

A ship sails from a harbour HH for 1212 km on a bearing of 060∘060^{\circ} to AA, then 88 km on a bearing of 150∘150^{\circ} to BB. Using a scale of 1 cm to 2 km, make a scale drawing of its course. Use your drawing to find (a) the distance HBHB (b) the bearing of BB from HH (c) the bearing of HH from BB. (The drawing is not to the real size: construct on paper and measure your own drawing.)

A scale drawing, 1 cm to 2 km, of a ship sailing 12 km from H on a bearing of 060° to A, then 8 km on a bearing of 150° to B, with HB dashedHABNN12 km8 km? km060°150°Scale: 1 cm to 2 km

Solution

In lesson 7.3 you calculated a course like this with the sine and cosine rules; here the question asks for a drawing.

Drawing lengths at 1 cm to 2 km: 12÷2=612 \div 2 = 6 cm and 8÷2=48 \div 2 = 4 cm.

Mark HH and draw a north line through it. Measure 60∘60^{\circ} clockwise from north and draw HA=6HA = 6 cm.

Draw a north line at AA, parallel to the first. Measure 150∘150^{\circ} clockwise from it and draw AB=4AB = 4 cm. Join HBHB.

(a) Measure HB≈7.2HB \approx 7.2 cm, so HB≈7.2×2=14.4HB \approx 7.2 \times 2 = 14.4 km. Any length from 7.07.0 cm to 7.47.4 cm, which is 14.014.0 km to 14.814.8 km, is right.

(b) At HH, measure clockwise from the north line to HBHB: about 94∘94^{\circ}. The bearing of BB from HH is ≈094∘\approx 094^{\circ} (from 092∘092^{\circ} to 096∘096^{\circ}).

(c) The bearing of HH from BB is measured at BB. North lines are parallel, so it differs by 180∘180^{\circ}: 094∘+180∘=274∘,094^{\circ} + 180^{\circ} = 274^{\circ}\text{,} so the bearing is ≈274∘\approx 274^{\circ} (from 272∘272^{\circ} to 276∘276^{\circ}).

The scale drawing, 1 cm to 2 km, of the ship sailing 12 km from H on a bearing of 060° to A, then 8 km on a bearing of 150° to B, with HB measuredHABNN12 km8 km≈ 14.4 km060°150°Scale: 1 cm to 2 km

Check: at AA the bearing of HH is 060∘+180∘=240∘060^{\circ} + 180^{\circ} = 240^{\circ} and the bearing of BB is 150∘150^{\circ}, so ∠HAB=240∘−150∘=90∘.\angle HAB = 240^{\circ} - 150^{\circ} = 90^{\circ}\text{.} Then HB=122+82=14.4HB = \sqrt{12^{2} + 8^{2}} = 14.4 km (3 s.f.), and ∠AHB=tan⁡−1812=33.7∘,\angle AHB = \tan^{-1}\frac{8}{12} = 33.7^{\circ}\text{,} a bearing of 060∘+33.7∘=093.7∘.060^{\circ} + 33.7^{\circ} = 093.7^{\circ}\text{.}

(a) HB≈14.4HB \approx 14.4 km (b) ≈094∘\approx 094^{\circ} (c) ≈274∘\approx 274^{\circ}

Heights and Angles of Elevation

In lesson 7.1 the angle of elevation is measured at the observer, between the horizontal and the line of sight. In a scale drawing the level ground is a horizontal line, a building stands at right angles to it, and the angle of elevation is drawn at the observer with the protractor.

Example 3: The height of a building

From a point OO on level ground, 4040 m from the foot FF of a building, the angle of elevation of the top TT of the building is 35∘35^{\circ}. Using a scale of 1:10001 : 1000, make a scale drawing and use it to find the height of the building. (The drawing is not to the real size: construct on paper and measure your own drawing.)

A scale drawing at 1 : 1000: O is 40 m from the foot F of a building FT, and the angle of elevation of T from O is 35°OFT40 m? m35°Scale 1 : 1000

Solution

OF=40OF = 40 m =4000= 4000 cm, and 4000÷1000=44000 \div 1000 = 4 cm.

Draw OF=4OF = 4 cm. At FF draw a line at right angles to OFOF (a protractor at 90∘90^{\circ}, or a set square). At OO draw an angle of 35∘35^{\circ}; its arm meets the upright line at TT.

Measure FT≈2.8FT \approx 2.8 cm, so FT≈2.8×1000=2800FT \approx 2.8 \times 1000 = 2800 cm =28= 28 m. Any length from 2.62.6 cm to 3.03.0 cm, which is 2626 m to 3030 m, is right.

The scale drawing at 1 : 1000 of the building FT with its height measuredOFT40 m≈ 28 m35°Scale 1 : 1000

Check (lesson 7.1): FT=40tan⁡35∘=28.0FT = 40\tan 35^{\circ} = 28.0 m.

The building is ≈28\approx 28 m high.

A Plot with Four Sides

A scale drawing works even where no single rule gives the answer. A plot with four sides is constructed one side and one angle at a time, as the quadrilaterals of Secondary 1 were.

Example 4: A plot of land

A plot of land ABCDABCD has AB=80AB = 80 m, ∠DAB=75∘\angle DAB = 75^{\circ}, AD=50AD = 50 m, ∠ABC=100∘\angle ABC = 100^{\circ} and BC=60BC = 60 m, with CC and DD on the same side of ABAB. Using a scale of 1:10001 : 1000, make a scale drawing of the plot. Use it to find the length of CDCD and the size of ∠ADC\angle ADC. (The drawing is not to the real size: construct on paper and measure your own drawing.)

A scale drawing at 1 : 1000 of a plot ABCD with AB = 80 m, BC = 60 m, AD = 50 m, angle DAB = 75° and angle ABC = 100°; CD is unknownABCD80 m60 m? m50 m75°100°Scale 1 : 1000

Solution

Drawing lengths at 1:10001 : 1000: AB=8000÷1000=8AB = 8000 \div 1000 = 8 cm, AD=5AD = 5 cm and BC=6BC = 6 cm.

Draw AB=8AB = 8 cm. At AA draw an angle of 75∘75^{\circ} and mark DD on its arm 55 cm from AA.

At BB, on the same side of ABAB, draw an angle of 100∘100^{\circ} and mark CC on its arm 66 cm from BB. Join CDCD.

Measure CD≈7.8CD \approx 7.8 cm, so CD≈7.8×1000=7800CD \approx 7.8 \times 1000 = 7800 cm =78= 78 m (from 7.67.6 cm to 8.08.0 cm, 7676 m to 8080 m).

Measure ∠ADC≈113∘\angle ADC \approx 113^{\circ} (from 111∘111^{\circ} to 115∘115^{\circ}).

The scale drawing at 1 : 1000 of the plot ABCD with CD and angle ADC measuredABCD80 m60 m≈ 78 m50 m75°100°≈ 113°Scale 1 : 1000

The true values, worked out in several steps with the cosine and sine rules, are 78.278.2 m and 112.9∘112.9^{\circ}. The drawing gives them in a few minutes, to the accuracy a drawing has.

CD≈78CD \approx 78 m and ∠ADC≈113∘\angle ADC \approx 113^{\circ}.

Common Mistakes

  • Using a scale in two units as if it were a ratio: "1 cm to 5 m" is 1:5001 : 500 (since 55 m =500= 500 cm), not 1:51 : 5. Put both sides in the same unit first.
  • Measuring a bearing anticlockwise, or from the north line at the wrong point. Each bearing is measured clockwise from the north line at the point it is "from".
  • Changing back but forgetting the unit: 6.46.4 cm at 1:5001 : 500 is 6.4×500=32006.4 \times 500 = 3200 cm, which is 3232 m, not 32003200 m.
  • Writing a measured answer as if it were exact. Write ≈\approx, and know the range: 0.20.2 cm on the drawing, 2∘2^{\circ} for an angle.
  • Measuring the screen or a printed sketch instead of your own accurate drawing, or rubbing out the construction arcs.

Practice Questions

Use a sharp pencil, a ruler, a protractor and compasses. Construct each drawing on paper and measure your own drawing: a length within 0.20.2 cm and an angle within 2∘2^{\circ} of the answer is right. The questions get harder as you go.

Question 1

A school field is a rectangle 9090 m by 6060 m. It is to be drawn on paper 2020 cm by 1515 cm. Which of the scales 1:2001 : 200, 1:5001 : 500 and 1:10001 : 1000 should be used? Give a reason.

ShowHide solution

9090 m =9000= 9000 cm and 6060 m =6000= 6000 cm.

At 1:2001 : 200: 9000÷200=459000 \div 200 = 45 cm by 3030 cm, too large for the paper.

At 1:5001 : 500: 1818 cm by 1212 cm, which fits.

At 1:10001 : 1000: 99 cm by 66 cm, which fits but is smaller, so less accurate.

1:5001 : 500: it gives the largest drawing that fits the paper.

Question 2

A scale drawing is made at 1:25001 : 2500. (a) A wall is 150150 m long. How long is it on the drawing? (b) A path is 8585 m long. How long is it on the drawing? (c) A line on the drawing is 4.64.6 cm long. What real length does it represent?

ShowHide solution

(a) 150150 m =15 000= 15\,000 cm, and 15 000÷2500=615\,000 \div 2500 = 6 cm.

(b) 8585 m =8500= 8500 cm, and 8500÷2500=3.48500 \div 2500 = 3.4 cm.

(c) 4.6×2500=11 5004.6 \times 2500 = 11\,500 cm =115= 115 m.

(a) 66 cm (b) 3.43.4 cm (c) 115115 m

Question 3

On a scale drawing at 1:2501 : 250, Wei Ming measured a line as 7.87.8 cm and wrote: "The real length is 19501950 m." What is his mistake? Give the correct length.

ShowHide solution

7.8×250=19507.8 \times 250 = 1950 is right, but the drawing length was in cm, so the real length is 19501950 cm, not 19501950 m.

19501950 cm =1950÷100=19.5= 1950 \div 100 = 19.5 m.

He kept the unit as metres; the real length is 19501950 cm =19.5= 19.5 m.

Question 4

A field PQRPQR has PQ=80PQ = 80 m, QR=50QR = 50 m and RP=60RP = 60 m. Using a scale of 1:10001 : 1000, construct a scale drawing of the field. Use it to find the size of the largest angle of the field.

ShowHide solution

Drawing lengths: PQ=8PQ = 8 cm, QR=5QR = 5 cm and RP=6RP = 6 cm.

Draw PQ=8PQ = 8 cm. Draw an arc of radius 66 cm about PP and an arc of radius 55 cm about QQ; they cross at RR. Join PRPR and QRQR.

The largest angle is opposite the longest side, PQPQ: it is ∠PRQ\angle PRQ. Measure it: ≈93∘\approx 93^{\circ} (from 91∘91^{\circ} to 95∘95^{\circ}).

The scale drawing at 1 : 1000 of the field PQR with PQ = 80 m, QR = 50 m and RP = 60 m, made with arcs about P and Q, and angle PRQ measuredPQR80 m50 m60 m≈ 93°Scale 1 : 1000

Check: the cosine rule gives cos⁡R=502+602−8022×50×60=−0.05,\cos R = \frac{50^{2} + 60^{2} - 80^{2}}{2 \times 50 \times 60} = -0.05\text{,} so ∠PRQ=92.87…∘\angle PRQ = 92.87\ldots^{\circ}, which is 93∘93^{\circ} to the nearest degree.

The largest angle, ∠PRQ\angle PRQ, is ≈93∘\approx 93^{\circ}.

Question 5

A triangular garden PQRPQR has PQ=75PQ = 75 m, PR=60PR = 60 m and ∠QPR=110∘\angle QPR = 110^{\circ}. Using a scale of 1:15001 : 1500, make a scale drawing of the garden and find the length of QRQR.

ShowHide solution

Drawing lengths: PQ=7500÷1500=5PQ = 7500 \div 1500 = 5 cm and PR=6000÷1500=4PR = 6000 \div 1500 = 4 cm.

Draw PQ=5PQ = 5 cm, an angle of 110∘110^{\circ} at PP, and mark RR on its arm 44 cm from PP. Join QRQR.

Measure QR≈7.4QR \approx 7.4 cm, so QR≈7.4×1500=11 100QR \approx 7.4 \times 1500 = 11\,100 cm =111= 111 m (from 7.27.2 cm to 7.67.6 cm, 108108 m to 114114 m).

The scale drawing at 1 : 1500 of the garden PQR with PQ = 75 m, PR = 60 m and angle QPR = 110°, and QR measuredPQR75 m≈ 111 m60 m110°Scale 1 : 1500

Check: the cosine rule gives QR=110.9QR = 110.9 m.

QR≈111QR \approx 111 m

Question 6

A boat leaves a jetty HH and sails 66 km on a bearing of 040∘040^{\circ} to AA, then 88 km on a bearing of 130∘130^{\circ} to BB. Using a scale of 1 cm to 1 km, make a scale drawing. Find the distance HBHB and the bearing of BB from HH.

ShowHide solution

Draw a north line at HH; at 40∘40^{\circ} clockwise from it draw HA=6HA = 6 cm.

Draw a north line at AA; at 130∘130^{\circ} clockwise from it draw AB=8AB = 8 cm. Join HBHB.

Measure HB≈10.0HB \approx 10.0 cm, so HB≈10.0HB \approx 10.0 km (from 9.89.8 cm to 10.210.2 cm, 9.89.8 km to 10.210.2 km). Measure the bearing of BB at HH: ≈093∘\approx 093^{\circ} (from 091∘091^{\circ} to 095∘095^{\circ}).

The scale drawing, 1 cm to 1 km, of the boat sailing 6 km from H on a bearing of 040° to A, then 8 km on a bearing of 130° to B, and HB joinedHABNN6 km8 km040°130°Scale: 1 cm to 1 km

Check: the angle at AA is 220∘−130∘=90∘,220^{\circ} - 130^{\circ} = 90^{\circ}\text{,} so HB=62+82=10HB = \sqrt{6^{2} + 8^{2}} = 10 km, and the bearing is 040∘+tan⁡−186=040∘+53.1∘=093.1∘.040^{\circ} + \tan^{-1}\frac{8}{6} = 040^{\circ} + 53.1^{\circ} = 093.1^{\circ}\text{.}

HB≈10.0HB \approx 10.0 km, on a bearing of ≈093∘\approx 093^{\circ} from HH.

Question 7

A hiker walks 44 km from PP on a bearing of 300∘300^{\circ} to QQ, then 66 km on a bearing of 070∘070^{\circ} to RR. Using a scale of 1 cm to 1 km, make a scale drawing. Find how far RR is from PP, and the bearing of RR from PP.

ShowHide solution

Draw a north line at PP; at 300∘300^{\circ} clockwise from it (that is, 60∘60^{\circ} west of north) draw PQ=4PQ = 4 cm.

Draw a north line at QQ; at 70∘70^{\circ} clockwise from it draw QR=6QR = 6 cm. Join PRPR.

Measure PR≈4.6PR \approx 4.6 cm, so PR≈4.6PR \approx 4.6 km (from 4.44.4 cm to 4.84.8 cm, 4.44.4 km to 4.84.8 km). Measure clockwise from north at PP to PRPR: ≈028∘\approx 028^{\circ} (from 026∘026^{\circ} to 030∘030^{\circ}).

The scale drawing, 1 cm to 1 km, of the walk 4 km from P on a bearing of 300° to Q, then 6 km on a bearing of 070° to R, with PR measuredPQRNN4 km6 km≈ 4.6 km300°070°Scale: 1 cm to 1 km

Check: at QQ the bearing of PP is 300∘−180∘=120∘,300^{\circ} - 180^{\circ} = 120^{\circ}\text{,} so ∠PQR=120∘−70∘=50∘,\angle PQR = 120^{\circ} - 70^{\circ} = 50^{\circ}\text{,} and the cosine rule gives PR=4.60PR = 4.60 km.

PR≈4.6PR \approx 4.6 km, on a bearing of ≈028∘\approx 028^{\circ} from PP.

Question 8

From the top TT of a vertical cliff 6060 m high, the angle of depression of a boat BB is 25∘25^{\circ}. Using a scale of 1:10001 : 1000, make a scale drawing and find how far the boat is from the foot FF of the cliff.

ShowHide solution

The angle of elevation of TT from BB equals the angle of depression of BB from TT (lesson 7.1), so ∠TBF=25∘\angle TBF = 25^{\circ}.

FT=6000÷1000=6FT = 6000 \div 1000 = 6 cm. Draw FT=6FT = 6 cm upright and a horizontal line through FF. At TT draw the horizontal and an angle of 25∘25^{\circ} below it; the arm meets the ground line at BB.

Measure BF≈12.9BF \approx 12.9 cm, so BF≈12.9×1000=12 900BF \approx 12.9 \times 1000 = 12\,900 cm =129= 129 m (from 12.712.7 cm to 13.113.1 cm, 127127 m to 131131 m).

The scale drawing at 1 : 1000 of the cliff FT, 60 m high, and the boat B, with the angle of depression 25° at T and BF measuredBFT≈ 129 m60 m25°25°Scale 1 : 1000

Check: BF=60tan⁡25∘=128.7BF = \frac{60}{\tan 25^{\circ}} = 128.7 m.

The boat is ≈129\approx 129 m from the foot of the cliff.

Question 9

From AA the angle of elevation of the top of a tower is 30∘30^{\circ}. From BB, 5050 m nearer the tower on level ground, it is 50∘50^{\circ}. Using 1 cm to 10 m, find the height of the tower.

ShowHide solution

Draw AB=50÷10=5AB = 50 \div 10 = 5 cm, and carry the line on past BB towards the tower.

At AA draw an angle of 30∘30^{\circ} above the line; at BB draw an angle of 50∘50^{\circ} above the line. The two arms cross at TT, the top of the tower.

Draw the perpendicular from TT to the line ABAB produced (a set square), meeting it at FF, the foot of the tower.

Measure FT≈5.6FT \approx 5.6 cm, so the height is ≈5.6×10=56\approx 5.6 \times 10 = 56 m (from 5.45.4 cm to 5.85.8 cm, 5454 m to 5858 m).

The scale drawing, 1 cm to 10 m, of the tower FT with A and B on level ground 50 m apart, the angles of elevation 30° at A and 50° at B, and FT measuredABFT50 m≈ 56 m30°50°Scale: 1 cm to 10 m

Check: the sine rule in △ABT\triangle ABT (the angle at TT is 50∘−30∘=20∘50^{\circ} - 30^{\circ} = 20^{\circ}) gives BT=50sin⁡30∘sin⁡20∘,BT = \frac{50\sin 30^{\circ}}{\sin 20^{\circ}}\text{,} and the height is BTsin⁡50∘=56.0BT\sin 50^{\circ} = 56.0 m.

The tower is ≈56\approx 56 m high.

Question 10

A plot PQRSPQRS has PQ=60PQ = 60 m, ∠SPQ=90∘\angle SPQ = 90^{\circ}, PS=45PS = 45 m, ∠PQR=75∘\angle PQR = 75^{\circ} and QR=50QR = 50 m, with RR and SS on the same side of PQPQ. Using a scale of 1:10001 : 1000, make a scale drawing and find the length of SRSR and the size of ∠PSR\angle PSR.

ShowHide solution

Drawing lengths: PQ=6PQ = 6 cm, PS=4.5PS = 4.5 cm, QR=5QR = 5 cm.

Draw PQ=6PQ = 6 cm. At PP draw a right angle and mark SS 4.54.5 cm from PP. At QQ, on the same side, draw 75∘75^{\circ} and mark RR 55 cm from QQ. Join SRSR.

Measure SR≈4.7SR \approx 4.7 cm, so SR≈47SR \approx 47 m (from 4.54.5 cm to 4.94.9 cm, 4545 m to 4949 m), and ∠PSR≈94∘\angle PSR \approx 94^{\circ} (from 92∘92^{\circ} to 96∘96^{\circ}).

The scale drawing at 1 : 1000 of the plot PQRS with PQ = 60 m, PS = 45 m, QR = 50 m, a right angle at P and angle PQR = 75°, with SR and angle PSR measuredPQRS60 m50 m≈ 47 m45 m75°≈ 94°Scale 1 : 1000

SR≈47SR \approx 47 m and ∠PSR≈94∘\angle PSR \approx 94^{\circ}.

Question 11

Two coastguard stations AA and BB are 1010 km apart, with BB due east of AA. A ship SS is on a bearing of 040∘040^{\circ} from AA and on a bearing of 315∘315^{\circ} from BB. Using a scale of 1 cm to 1 km, make a scale drawing and find the distance of the ship from AA.

ShowHide solution

Draw AB=10AB = 10 cm, from west to east, and a north line at each end, at right angles to ABAB.

At AA draw the line on a bearing of 040∘040^{\circ}. At BB the bearing 315∘315^{\circ} is 360∘−315∘=45∘360^{\circ} - 315^{\circ} = 45^{\circ} anticlockwise from north, so draw the line 45∘45^{\circ} to the west of the north line at BB. The two lines cross at SS.

Measure AS≈7.1AS \approx 7.1 cm, so the ship is ≈7.1\approx 7.1 km from AA (from 6.96.9 cm to 7.37.3 cm, 6.96.9 km to 7.37.3 km).

The scale drawing, 1 cm to 1 km, of the stations A and B 10 km apart and the ship S on a bearing of 040° from A and 315° from B, with the 45° between the north line at B and BS, and AS measuredABSNN10 km≈ 7.1 km45°040°Scale: 1 cm to 1 km

Check: ∠SAB=90∘−40∘=50∘,\angle SAB = 90^{\circ} - 40^{\circ} = 50^{\circ}\text{,} ∠SBA=315∘−270∘=45∘,\angle SBA = 315^{\circ} - 270^{\circ} = 45^{\circ}\text{,} so ∠ASB=85∘\angle ASB = 85^{\circ}, and the sine rule gives AS=10sin⁡45∘sin⁡85∘=7.10AS = \frac{10\sin 45^{\circ}}{\sin 85^{\circ}} = 7.10 km.

The ship is ≈7.1\approx 7.1 km from AA.

Key Points

  • A scale drawing at 1:n1 : n: drawing length = real length ÷ n\div\ n, and real length = drawing length × n\times\ n, in the same unit. Angles are unchanged.
  • Choose a scale that fits the paper, makes the drawing as large as it can be, and gives easy numbers.
  • Sketch first, change to drawing lengths, construct (leaving the arcs), measure to 0.10.1 cm and 1∘1^{\circ}, then change back.
  • Bearings: a north line at each point, and each angle clockwise from it. Heights: the ground horizontal, the building upright, the angle of elevation at the observer.
  • A measured answer is written with ≈\approx. It is right within 0.20.2 cm and 2∘2^{\circ} on the drawing; in the real unit, within nn times 0.20.2 cm.
  • A calculation can check a drawing; when a question asks for a scale drawing, the answer is measured.

Previous lesson9.4 Using Similar Triangles Next lesson9.6 Perpendicular Bisectors

All Secondary 3 (Grade 9) lessons

Home Campus has lessons for Primary 3 to Secondary 4, and practice questions with worked solutions and worksheets for Primary 3 to Secondary 2. Register free to practise and keep track of progress.

This lesson follows the Singapore Secondary 3 syllabus and was checked question by question before it was published. Spotted a mistake? Tell us.