Skip to the page
Home Campus
Start free

Belts Round Two Wheels

A belt pulled tight round two wheels is made of straight pieces and arcs. Find the straight pieces with tangents and Pythagoras' theorem, the angles with cosine, and each wheel's arc as in chapter 8.

Before you start

  • In lesson 11.2 you met the tangent and the radius: the angle between a tangent and the radius at the point of contact is a right angle (tan ⊥ rad). If ABAB touches a circle with centre OO at AA, then ∠OAB=90∘\angle OAB = 90^{\circ}.
  • In chapter 8 you found the length of an arc: arc length =θ360∘×2πr,= \frac{\theta}{360^{\circ}} \times 2\pi r\text{,} where θ\theta is the angle the arc subtends at the centre. An arc that subtends 120∘120^{\circ} at the centre of a circle with radius 66 cm is 120∘360∘×2π×6=4π≈12.6\frac{120^{\circ}}{360^{\circ}} \times 2\pi \times 6 = 4\pi \approx 12.6 cm.
  • In Secondary 2 you found an angle of a right-angled triangle from two sides: cos⁡θ=adjacenthypotenuse.\cos \theta = \frac{\text{adjacent}}{\text{hypotenuse}}\text{.} With the adjacent side 22 cm and the hypotenuse 55 cm, θ=cos⁡−125=66.421…∘,\theta = \cos^{-1} \frac{2}{5} = 66.421\ldots^{\circ}\text{,} so θ=66.4∘\theta = 66.4^{\circ} (1 d.p.).
  • In Secondary 2 you used Pythagoras' theorem: with the hypotenuse 1010 cm and one side 66 cm, the third side is 102−62=64=8\sqrt{10^{2} - 6^{2}} = \sqrt{64} = 8 cm.
  • In Secondary 1 you met interior angles: if OA∥QBOA \parallel QB, interior angles between them add up to 180∘180^{\circ} (int. ∠s, OA // QB).

What a Belt Is Made Of

A belt pulled tight round two wheels, such as the belt that drives a machine or a strap round two pipes, is made of two straight pieces and two arcs, one arc on each wheel. In this lesson the belt is open: its straight pieces do not cross between the wheels.

Each straight piece touches both wheels, so it is a tangent to each of them. The radius to each point of contact is at right angles to it (tan ⊥ rad). Below, OAOA and QBQB are both at right angles to ABAB, so OA∥QBOA \parallel QB.

Two wheels with centres O and Q and a belt round them: the straight pieces AB and CD, the major arc AC on the larger wheel and the minor arc DB on the smaller one; the radii OA and QB are at right angles to ABOQABCD

The length of a belt

Belt == the two straight pieces ++ the arc on one wheel ++ the arc on the other wheel.

Each straight piece is at right angles to the radius at each of its ends (tan ⊥ rad), so those two radii are parallel.

Each arc is found as in chapter 8, from the angle it subtends at its own wheel's centre.

Which value of π

"Use the π\pi button on your calculator" means work with the calculator's value of π\pi. "Take π=3.142\pi = 3.142" means use 3.142 in its place. Every answer on this page comes out the same either way, correct to 3 significant figures.

Two Equal Wheels

When the wheels have the same radius, OAOA and QBQB are equal, parallel and both at right angles to ABAB, so ABQOABQO is a rectangle: each straight piece is as long as OQOQ, the distance between the centres.

The radii OAOA and OCOC are both at right angles to the straight pieces, which are parallel to OQOQ, so AOCAOC is a straight line, a diameter. The belt goes round exactly half of each wheel, and the two semicircles together make one whole circumference.

Two equal wheels with centres O and Q and a belt round them: the radii OA, OC, QB and QD are at right angles to the straight pieces AB and CD, AOC and BQD are diameters, and the belt goes round half of each wheelOQABCD

Two equal wheels

Each straight piece =OQ= OQ, the distance between the centres.

Belt =2×OQ+2πr= 2 \times OQ + 2\pi r, where rr is the radius of each wheel: the two straight pieces and the circumference of one wheel.

Example 1: A belt round two equal wheels

Two wheels, each of radius 55 cm, have centres OO and QQ that are 1515 cm apart. A belt goes tightly round both. Find the length of the belt. Use the π\pi button on your calculator.

Two wheels of radius 5 cm with centres O and Q 15 cm apart, and a belt round them along the straight pieces AB and CD and the far half of each wheelOQABCD15 cm5 cm

Solution

OAOA and QBQB are equal and both at right angles to ABAB (tan ⊥ rad), so ABQOABQO is a rectangle and AB=OQ=15AB = OQ = 15 cm. In the same way CD=15CD = 15 cm.

The arcs are two semicircles of radius 55 cm, together one circumference: 2π×5=10π2\pi \times 5 = 10\pi cm.

Belt =15+15+10π=30+10π=61.415…= 15 + 15 + 10\pi = 30 + 10\pi = 61.415\ldots cm

(30+10π)(30 + 10\pi) cm ≈61.4\approx 61.4 cm (3 s.f.). With π=3.142\pi = 3.142: 30+31.42=61.4230 + 31.42 = 61.42, the same.

Example 2: Working back from the length of the belt

A belt 100100 cm long goes tightly round two equal wheels of radius 77 cm. Find the distance between the centres of the wheels. Use the π\pi button on your calculator.

Two equal wheels of radius 7 cm with centres O and Q and a belt round them; the distance OQ between the centres is asked forOQABCD?7 cm

Solution

Each straight piece is as long as OQOQ, and the two semicircles make one circumference (tan ⊥ rad, as in Example 1).

Belt =2×OQ+2π×7= 2 \times OQ + 2\pi \times 7, so 2×OQ+14π=1002 \times OQ + 14\pi = 100.

2×OQ=100−14π=56.017…,2 \times OQ = 100 - 14\pi = 56.017\ldots\text{,} so OQ=28.008…OQ = 28.008\ldots cm.

Check: 28.028.0 is more than 7+7=147 + 7 = 14, so the wheels are clear of each other.

OQ=28.0OQ = 28.0 cm (3 s.f.). With π=3.142\pi = 3.142: (100−43.988)÷2=28.006,(100 - 43.988) \div 2 = 28.006\text{,} the same.

Two Unequal Wheels

When one wheel is larger, the straight pieces are not parallel to OQOQ. The radii OAOA and QBQB are still both at right angles to ABAB (tan ⊥ rad), so OA∥QBOA \parallel QB. Draw QNQN parallel to BABA, meeting OAOA at NN.

ABQNABQN is a rectangle, so NQ=ABNQ = AB and NA=QBNA = QB. Then ON=OA−QBON = OA - QB, the difference of the radii, and ∠ONQ=90∘\angle ONQ = 90^{\circ}. In the right-angled triangle ONQONQ, the hypotenuse OQOQ is the distance between the centres, ONON is the difference of the radii, and NQNQ is the straight piece. Let θ=∠AOQ\theta = \angle AOQ.

Two unequal wheels with centres O and Q and a belt round them along AB and CD; N is on OA with QN parallel to AB, so that ABQN is a rectangle and the angle ONQ is a right angle; the angle AOQ is θOQABCDNθ

The arcs. The belt is symmetrical about OQOQ, so ∠COQ=θ\angle COQ = \theta too. On the larger wheel the belt goes the long way round from AA to CC: its arc subtends 360∘−2θ360^{\circ} - 2\theta at OO.

On the smaller wheel, OA∥QBOA \parallel QB, so ∠BQO=180∘−θ\angle BQO = 180^{\circ} - \theta (int. ∠s, OA // QB), and ∠DQO=180∘−θ\angle DQO = 180^{\circ} - \theta in the same way. So the belt's arc there subtends 360∘−2(180∘−θ)=2θ360^{\circ} - 2(180^{\circ} - \theta) = 2\theta at QQ. The two angles add up to 360∘360^{\circ}: a useful check.

Two unequal wheels with centres O and Q and a belt round them; the angle AOQ is θ, the belt's arc on the larger wheel subtends the reflex angle AOC, and its arc on the smaller wheel subtends the angle BQD of 2θOQABCDθ2θ

Two unequal wheels

1. ONON is the difference of the radii, and ∠ONQ=90∘\angle ONQ = 90^{\circ}.

2. The straight piece: AB=NQAB = NQ, where NQ2=OQ2−ON2NQ^{2} = OQ^{2} - ON^{2} (Pythagoras' theorem).

3. The angle: cos⁡θ=ONOQ\cos \theta = \frac{ON}{OQ}.

4. The arcs: 360∘−2θ360^{\circ} - 2\theta at the centre of the larger wheel, 2θ2\theta at the centre of the smaller.

5. Belt =2×AB+= 2 \times AB + both arcs. Keep the full value of θ\theta until the last line.

Example 3: The straight piece and the angle

Two wheels of radii 1616 cm and 66 cm have centres OO and QQ that are 2626 cm apart. A belt goes tightly round both, along the straight pieces ABAB and CDCD. Find (a) the length of ABAB, (b) the angle θ=∠AOQ\theta = \angle AOQ.

Two wheels with centres O and Q 26 cm apart, of radii 16 cm and 6 cm, and a belt round them along AB and CD; the radii OA and QB meet AB at right angles, AB is asked for, and the angle AOQ is θOQABCDθ?26 cm16 cm

Solution

OAOA and QBQB are both at right angles to ABAB (tan ⊥ rad), so OA∥QBOA \parallel QB. Draw QN∥BAQN \parallel BA to meet OAOA at NN: ABQNABQN is a rectangle, so NA=QB=6NA = QB = 6 cm, ON=16−6=10ON = 16 - 6 = 10 cm and ∠ONQ=90∘\angle ONQ = 90^{\circ}.

The wheels with centres O and Q, of radii 16 cm and 6 cm; N is on OA with QN parallel to AB, so that ON is 10 cm and OQ is 26 cm, the angle ONQ is a right angle, and the angle NOQ is θOQABCDNθ26 cm10 cm

(a) In △ONQ\triangle ONQ: NQ2=262−102=676−100=576,NQ^{2} = 26^{2} - 10^{2} = 676 - 100 = 576\text{,} so AB=NQ=24AB = NQ = 24 cm (Pythagoras' theorem).

(b) cos⁡θ=ONOQ=1026,\cos \theta = \frac{ON}{OQ} = \frac{10}{26}\text{,} so θ=cos⁡−11026=67.380…∘.\theta = \cos^{-1} \frac{10}{26} = 67.380\ldots^{\circ}\text{.}

(a) AB=24AB = 24 cm (b) θ=67.4∘\theta = 67.4^{\circ} (1 d.p.)

Example 4: The length of the belt

Find the length of the belt round the two wheels of Example 3. Use the π\pi button on your calculator.

The same two wheels, with centres O and Q, of radii 16 cm and 6 cm, and the belt round them: the straight pieces AB and CD, the major arc AC and the minor arc DB; the angle AOQ is θOQABCDθ

Solution

From Example 3, AB=CD=24AB = CD = 24 cm and θ=67.380…∘\theta = 67.380\ldots^{\circ}.

Larger wheel: the arc subtends 360∘−2θ=225.239…∘360^{\circ} - 2\theta = 225.239\ldots^{\circ} at OO, so arc =225.239…360×2π×16=62.898…= \frac{225.239\ldots}{360} \times 2\pi \times 16 = 62.898\ldots cm.

Smaller wheel: the arc subtends 2θ=134.760…∘2\theta = 134.760\ldots^{\circ} at QQ, so arc =134.760…360×2π×6=14.112…= \frac{134.760\ldots}{360} \times 2\pi \times 6 = 14.112\ldots cm.

Check: 225.239…∘+134.760…∘=360∘.225.239\ldots^{\circ} + 134.760\ldots^{\circ} = 360^{\circ}\text{.}

Belt =24+24+62.898…+14.112…=125.010…= 24 + 24 + 62.898\ldots + 14.112\ldots = 125.010\ldots cm

The belt is 125125 cm long (3 s.f.). With π=3.142\pi = 3.142: 125.02125.02, the same.

A String Round Two Logs or Pipes

A rope or strap pulled tightly round two logs or pipes that lie side by side is a belt round two wheels that touch. At the point where they touch, the two circles have the same tangent, and each radius to that point is at right angles to it (tan ⊥ rad), so the two radii lie along one line through both centres. So the distance between the centres is the sum of the radii. Everything else is worked as before.

Example 5: A rope round two logs

The ends of two logs are circles of radii 1212 cm and 33 cm, with centres OO and QQ, and the logs touch. A rope is pulled tightly round them, along ABAB and CDCD. Find the length of the rope. Use the π\pi button on your calculator.

Two circles with centres O and Q, of radii 12 cm and 3 cm, touching, and a rope round them along AB and CDOQABCD12 cm

Solution

The logs touch, so OQ=12+3=15OQ = 12 + 3 = 15 cm.

As before, NN is on OAOA with QN∥BAQN \parallel BA (tan ⊥ rad): ON=12−3=9ON = 12 - 3 = 9 cm and ∠ONQ=90∘\angle ONQ = 90^{\circ}. AB=NQ=152−92=144=12AB = NQ = \sqrt{15^{2} - 9^{2}} = \sqrt{144} = 12 cm (Pythagoras' theorem), and CD=12CD = 12 cm.

cos⁡θ=915\cos \theta = \frac{9}{15}, so θ=∠AOQ=53.130…∘.\theta = \angle AOQ = 53.130\ldots^{\circ}\text{.}

Larger log: 360∘−2θ=253.739…∘,360^{\circ} - 2\theta = 253.739\ldots^{\circ}\text{,} arc =253.739…360×2π×12=53.143…= \frac{253.739\ldots}{360} \times 2\pi \times 12 = 53.143\ldots cm.

Smaller log: 2θ=106.260…∘2\theta = 106.260\ldots^{\circ}, arc =106.260…360×2π×3=5.563…= \frac{106.260\ldots}{360} \times 2\pi \times 3 = 5.563\ldots cm.

Rope =12+12+53.143…+5.563…=82.706…= 12 + 12 + 53.143\ldots + 5.563\ldots = 82.706\ldots cm

The rope is 82.782.7 cm long (3 s.f.). With π=3.142\pi = 3.142: 82.7182.71, the same.

Common Mistakes

  • Taking each arc as a semicircle when the wheels are not equal. Only equal wheels have semicircles; with unequal wheels, work out each arc's angle from θ\theta.
  • Putting the arcs the wrong way round. The belt goes round more than half of the larger wheel (360∘−2θ360^{\circ} - 2\theta) and less than half of the smaller (2θ2\theta).
  • Using the sum of the radii for ONON. In an open belt ONON is the difference of the radii; the sum is the distance between the centres only when the wheels touch.
  • Taking the straight piece to be as long as OQOQ when the wheels are not equal. It is shorter: it is NQNQ, a side of the right-angled triangle ONQONQ.
  • Counting one straight piece or one arc only: a belt has two of each.
  • Rounding θ\theta early, or changing from one value of π\pi to the other in the middle of an answer. Keep full values, and one value of π\pi, until the last line.

Practice Questions

Give lengths correct to 3 significant figures and angles to 1 decimal place, unless they are exact. In each question the belt goes tightly round both wheels, along the straight pieces ABAB and CDCD, and the wheels have centres OO and QQ. Give a reason for every step. Try each question before opening its solution.

Question 1

Two wheels, each of radius 88 cm, have centres 3030 cm apart. Find the length of the belt. Use the π\pi button on your calculator.

Two wheels of radius 8 cm with centres O and Q 30 cm apart, and a belt round themOQABCD30 cm8 cm
ShowHide solution

The radii at the ends of each straight piece are equal and at right angles to it (tan ⊥ rad), so each straight piece is as long as OQOQ: 3030 cm.

The arcs are two semicircles, together one circumference: 2π×8=16π2\pi \times 8 = 16\pi cm.

Belt =30+30+16π=60+16π=110.265…= 30 + 30 + 16\pi = 60 + 16\pi = 110.265\ldots cm

(60+16π)(60 + 16\pi) cm ≈110\approx 110 cm (3 s.f.)

Question 2

Two pulleys, each of diameter 3030 cm, have centres 5050 cm apart. Find the length of the belt. Take π=3.142\pi = 3.142.

Two equal pulleys with centres O and Q 50 cm apart, and a belt round themOQABCD50 cm
ShowHide solution

The radius is 30÷2=1530 \div 2 = 15 cm. The radii at the ends of each straight piece are equal and at right angles to it (tan ⊥ rad), so each straight piece is as long as OQOQ: 5050 cm.

The two semicircles make one circumference: 3.142×30=94.263.142 \times 30 = 94.26 cm.

Belt =50+50+94.26=194.26= 50 + 50 + 94.26 = 194.26 cm

The belt is 194194 cm long (3 s.f.).

Question 3

Two pipes, each of diameter 1212 cm, touch, and a strap is pulled tightly round them. Find the length of the strap. Use the π\pi button on your calculator.

The ends of two equal pipes, circles with centres O and Q, touching, and a strap round themOQABCD
ShowHide solution

The radius is 66 cm, and the pipes touch, so OQ=6+6=12OQ = 6 + 6 = 12 cm.

The radii at the ends of each straight piece are equal and at right angles to it (tan ⊥ rad), so each straight piece is 1212 cm, and the two semicircles make one circumference, 2π×6=12π2\pi \times 6 = 12\pi cm.

Strap =12+12+12π=24+12π=61.699…= 12 + 12 + 12\pi = 24 + 12\pi = 61.699\ldots cm

(24+12π)(24 + 12\pi) cm ≈61.7\approx 61.7 cm (3 s.f.)

Question 4

A belt 1.51.5 m long goes round two equal wheels of radius 1010 cm. Find the distance between their centres, in centimetres. Use the π\pi button on your calculator.

Two equal wheels of radius 10 cm with centres O and Q and a belt round them; the distance OQ is asked forOQABCD?
ShowHide solution

1.51.5 m =150= 150 cm. Each straight piece is as long as OQOQ, and the arcs make one circumference (tan ⊥ rad, equal radii).

2×OQ+2π×10=150,2 \times OQ + 2\pi \times 10 = 150\text{,} so 2×OQ=150−20π=87.168…2 \times OQ = 150 - 20\pi = 87.168\ldots

OQ=43.584…OQ = 43.584\ldots cm

OQ=43.6OQ = 43.6 cm (3 s.f.)

Question 5

Two wheels of radii 1010 cm and 44 cm have centres 2020 cm apart. Find the length of the straight piece ABAB.

Two wheels with centres O and Q 20 cm apart, of radii 10 cm and 4 cm, and a belt round them along AB and CD; AB is asked forOQABCD?20 cm10 cm
ShowHide solution

OAOA and QBQB are both at right angles to ABAB (tan ⊥ rad), so OA∥QBOA \parallel QB. With NN on OAOA and QN∥BAQN \parallel BA, ABQNABQN is a rectangle: ON=10−4=6ON = 10 - 4 = 6 cm and ∠ONQ=90∘\angle ONQ = 90^{\circ}.

AB=NQ=202−62=364=19.078…AB = NQ = \sqrt{20^{2} - 6^{2}} = \sqrt{364} = 19.078\ldots cm (Pythagoras' theorem)

AB=19.1AB = 19.1 cm (3 s.f.)

Question 6

Two wheels of radii 1111 cm and 33 cm have centres 1919 cm apart. Find (a) θ=∠AOQ\theta = \angle AOQ, (b) the angle that the belt's arc subtends at OO, (c) the angle that the belt's arc subtends at QQ.

Two wheels with centres O and Q 19 cm apart, of radii 11 cm and 3 cm, and a belt round them along AB and CD; the angle AOQ is θOQABCDθ19 cm11 cm
ShowHide solution

(a) OA∥QBOA \parallel QB, both at right angles to ABAB (tan ⊥ rad). With NN on OAOA and QN∥BAQN \parallel BA: ON=11−3=8ON = 11 - 3 = 8 cm and ∠ONQ=90∘\angle ONQ = 90^{\circ}.

cos⁡θ=819\cos \theta = \frac{8}{19}, so θ=65.098…∘\theta = 65.098\ldots^{\circ}.

(b) The belt goes the long way round the larger wheel: 360∘−2θ=229.802…∘.360^{\circ} - 2\theta = 229.802\ldots^{\circ}\text{.}

(c) ∠BQO=180∘−θ\angle BQO = 180^{\circ} - \theta (int. ∠s, OA // QB), and ∠DQO\angle DQO is the same, so the arc subtends 360∘−2(180∘−θ)=2θ=130.197…∘.360^{\circ} - 2(180^{\circ} - \theta) = 2\theta = 130.197\ldots^{\circ}\text{.}

Check: 229.802…∘+130.197…∘=360∘.229.802\ldots^{\circ} + 130.197\ldots^{\circ} = 360^{\circ}\text{.}

(a) θ=65.1∘\theta = 65.1^{\circ} (b) 229.8∘229.8^{\circ} (c) 130.2∘130.2^{\circ}

Question 7

The straight piece ABAB of a belt touches the wheels at AA and BB, and ∠AOQ=70∘\angle AOQ = 70^{\circ}. (a) Give the reason why ∠OAB=∠QBA=90∘.\angle OAB = \angle QBA = 90^{\circ}\text{.} (b) Show that ∠BQO=110∘\angle BQO = 110^{\circ}. (c) Find the angle that the belt's arc subtends at OO, and the angle it subtends at QQ.

Two wheels with centres O and Q and a belt round them along AB and CD; the radii OA and QB are drawn, and the angle AOQ is 70°OQABCD70°
ShowHide solution

(a) Each is the angle between a tangent and the radius at its point of contact (tan ⊥ rad).

(b) ∠OAB+∠QBA=90∘+90∘=180∘,\angle OAB + \angle QBA = 90^{\circ} + 90^{\circ} = 180^{\circ}\text{,} so OA∥QBOA \parallel QB (int. ∠s supp.).

∠BQO=180∘−70∘=110∘\angle BQO = 180^{\circ} - 70^{\circ} = 110^{\circ} (int. ∠s, OA // QB), as required.

(c) The belt is symmetrical about OQOQ, so ∠COQ=70∘\angle COQ = 70^{\circ} and ∠DQO=110∘\angle DQO = 110^{\circ}.

At OO: 360∘−70∘−70∘=220∘360^{\circ} - 70^{\circ} - 70^{\circ} = 220^{\circ} (∠s at a point). At QQ: 360∘−110∘−110∘=140∘360^{\circ} - 110^{\circ} - 110^{\circ} = 140^{\circ} (∠s at a point).

(b) ∠BQO=110∘\angle BQO = 110^{\circ} (c) 220∘220^{\circ} at OO and 140∘140^{\circ} at QQ

Question 8

Two wheels of radii 1010 cm and 33 cm have centres 2323 cm apart. Find the length of the belt. Take π=3.142\pi = 3.142.

Two wheels with centres O and Q 23 cm apart, of radii 10 cm and 3 cm, and a belt round them along AB and CDOQABCD23 cm10 cm
ShowHide solution

OA∥QBOA \parallel QB, both at right angles to ABAB (tan ⊥ rad). With NN on OAOA and QN∥BAQN \parallel BA: ON=10−3=7ON = 10 - 3 = 7 cm and ∠ONQ=90∘\angle ONQ = 90^{\circ}.

AB=NQ=232−72=480=21.908…AB = NQ = \sqrt{23^{2} - 7^{2}} = \sqrt{480} = 21.908\ldots cm (Pythagoras' theorem), and CD=ABCD = AB.

θ=∠AOQ=cos⁡−1723=72.281…∘\theta = \angle AOQ = \cos^{-1} \frac{7}{23} = 72.281\ldots^{\circ}

Larger wheel: 360∘−2θ=215.437…∘,360^{\circ} - 2\theta = 215.437\ldots^{\circ}\text{,} arc =215.437…360×2×3.142×10=37.605…= \frac{215.437\ldots}{360} \times 2 \times 3.142 \times 10 = 37.605\ldots cm.

Smaller wheel: 2θ=144.562…∘2\theta = 144.562\ldots^{\circ}, arc =144.562…360×2×3.142×3=7.570…= \frac{144.562\ldots}{360} \times 2 \times 3.142 \times 3 = 7.570\ldots cm.

Belt =2×21.908…+37.605…+7.570…=88.993…= 2 \times 21.908\ldots + 37.605\ldots + 7.570\ldots = 88.993\ldots cm

The belt is 89.089.0 cm long (3 s.f.).

Question 9

The ends of two pipes are circles of radii 1616 cm and 55 cm, and the pipes touch. A strap is pulled tightly round them. Find the length of the strap. Use the π\pi button on your calculator.

The ends of two pipes, circles with centres O and Q of radii 16 cm and 5 cm, touching, and a strap round them along AB and CDOQABCD16 cm
ShowHide solution

The pipes touch, so OQ=16+5=21OQ = 16 + 5 = 21 cm. With NN on OAOA and QN∥BAQN \parallel BA (tan ⊥ rad): ON=16−5=11ON = 16 - 5 = 11 cm and ∠ONQ=90∘\angle ONQ = 90^{\circ}.

Each straight piece =NQ=212−112=320=17.888…= NQ = \sqrt{21^{2} - 11^{2}} = \sqrt{320} = 17.888\ldots cm (Pythagoras' theorem)

θ=cos⁡−11121=58.411…∘\theta = \cos^{-1} \frac{11}{21} = 58.411\ldots^{\circ}

Larger pipe: 360∘−2θ=243.176…∘,360^{\circ} - 2\theta = 243.176\ldots^{\circ}\text{,} arc =243.176…360×2π×16=67.907…= \frac{243.176\ldots}{360} \times 2\pi \times 16 = 67.907\ldots cm.

Smaller pipe: 2θ=116.823…∘2\theta = 116.823\ldots^{\circ}, arc =116.823…360×2π×5=10.194…= \frac{116.823\ldots}{360} \times 2\pi \times 5 = 10.194\ldots cm.

Strap =2×17.888…+67.907…+10.194…=113.879…= 2 \times 17.888\ldots + 67.907\ldots + 10.194\ldots = 113.879\ldots cm

The strap is 114114 cm long (3 s.f.).

Question 10

A belt goes round two wheels of radii 1818 cm and 66 cm, and each straight piece is 3535 cm long. (a) Find OQOQ, the distance between the centres. (b) Show that the wheels do not touch.

Two wheels with centres O and Q, of radii 18 cm and 6 cm, and a belt round them; the straight piece AB is 35 cm and the distance OQ is asked forOQABCD35 cm?18 cm
ShowHide solution

(a) With NN on OAOA and QN∥BAQN \parallel BA, ABQNABQN is a rectangle (tan ⊥ rad): NQ=AB=35NQ = AB = 35 cm, ON=18−6=12ON = 18 - 6 = 12 cm and ∠ONQ=90∘\angle ONQ = 90^{\circ}.

OQ2=122+352=144+1225=1369,OQ^{2} = 12^{2} + 35^{2} = 144 + 1225 = 1369\text{,} so OQ=37OQ = 37 cm (Pythagoras' theorem).

(b) The wheels would touch if OQOQ were 18+6=2418 + 6 = 24 cm. OQ=37OQ = 37 cm is more than 2424 cm, so there is a gap of 1313 cm between them.

(a) OQ=37OQ = 37 cm (b) 37>18+637 > 18 + 6, so the wheels do not touch.

Question 11

A bicycle chain runs round two gear wheels, taken as circles of radii 1111 cm and 55 cm with centres 4242 cm apart. Find the length of the chain. Use the π\pi button on your calculator.

Two gear wheels with centres O and Q 42 cm apart, of radii 11 cm and 5 cm, and a chain round them along AB and CDOQABCD42 cm11 cm
ShowHide solution

With NN on OAOA and QN∥BAQN \parallel BA (tan ⊥ rad): ON=11−5=6ON = 11 - 5 = 6 cm and ∠ONQ=90∘\angle ONQ = 90^{\circ}.

Each straight piece =NQ=422−62=1728=41.569…= NQ = \sqrt{42^{2} - 6^{2}} = \sqrt{1728} = 41.569\ldots cm (Pythagoras' theorem)

θ=cos⁡−1642=81.786…∘\theta = \cos^{-1} \frac{6}{42} = 81.786\ldots^{\circ}

Larger wheel: 360∘−2θ=196.426…∘,360^{\circ} - 2\theta = 196.426\ldots^{\circ}\text{,} arc =196.426…360×2π×11=37.711…= \frac{196.426\ldots}{360} \times 2\pi \times 11 = 37.711\ldots cm.

Smaller wheel: 2θ=163.573…∘2\theta = 163.573\ldots^{\circ}, arc =163.573…360×2π×5=14.274…= \frac{163.573\ldots}{360} \times 2\pi \times 5 = 14.274\ldots cm.

Chain =2×41.569…+37.711…+14.274…=135.124…= 2 \times 41.569\ldots + 37.711\ldots + 14.274\ldots = 135.124\ldots cm

The chain is 135135 cm long (3 s.f.).

Key Points

  • A belt round two wheels is two straight pieces and two arcs. Each straight piece is a tangent to both wheels, at right angles to the radius at each end (tan ⊥ rad), so those two radii are parallel.
  • Two equal wheels: each straight piece is as long as OQOQ, the distance between the centres, and the two arcs are semicircles, so the belt is 2×OQ+2πr2 \times OQ + 2\pi r.
  • Two unequal wheels: draw QNQN parallel to the straight piece. In the right-angled triangle ONQONQ, ONON is the difference of the radii, NQNQ is the straight piece and OQOQ is the distance between the centres: Pythagoras' theorem gives NQNQ, and cos⁡θ=ONOQ\cos \theta = \frac{ON}{OQ} gives θ=∠AOQ\theta = \angle AOQ.
  • The belt's arc subtends 360∘−2θ360^{\circ} - 2\theta at the centre of the larger wheel and 2θ2\theta at the centre of the smaller; find each arc as in chapter 8, keeping full values until the end.
  • Logs or pipes that touch have their centres the sum of the radii apart.

Previous lesson11.8 Problems Using Several Circle Properties

All Secondary 3 (Grade 9) lessons

Home Campus has lessons for Primary 3 to Secondary 4, and practice questions with worked solutions and worksheets for Primary 3 to Secondary 2. Register free to practise and keep track of progress.

This lesson follows the Singapore Secondary 3 syllabus and was checked question by question before it was published. Spotted a mistake? Tell us.