Vectors and Their Notation
Tell a scalar from a vector; draw a vector as a directed line segment; name it by its end points, by a bold letter or as a column vector; read a column vector from a grid; and draw a vector from its column vector.
Before you start
- In Secondary 1 you plotted points from ordered pairs: is units to the right of the origin and units up. You also moved points: moving right or left changes the -coordinate, and moving up or down changes the -coordinate. This lesson uses the same moves, across and then up or down.
Scalars and Vectors
Some quantities are told completely by one number with its unit: a mass of kg, a time of hours, a temperature of °C. These are scalars.
Others need a direction as well. "Walk m" does not tell you where you end up; "walk m due east" does. A change of position like this is a displacement, and it is a vector: it has a size and a direction.
Scalars and vectors
A scalar is a quantity with size only: a single number with its unit.
A vector is a quantity with both size and direction. The size of a vector is called its magnitude.
| Scalar (size only) | Vector (size and direction) |
|---|---|
| distance: m | displacement: m due east |
| speed: km/h | velocity: km/h due north |
| mass, time, temperature, area | a push or a pull (a force): newtons downwards |
Speed says only how fast, so it is a scalar. A velocity is a speed in a given direction, so it is a vector. In the same way, a distance is a scalar and a displacement is a vector.
Example 1: Scalar or vector?
Say whether each quantity is a scalar or a vector. (a) a speed of km/h (b) a displacement of m due north (c) a temperature of °C (d) a force of newtons downwards (e) a velocity of m/s due west (f) a length of m
Solution
(a) Scalar: a speed has size only.
(b) Vector: a size, m, and a direction, north.
(c) Scalar: a temperature has no direction.
(d) Vector: a size, newtons, and a direction, downwards.
(e) Vector: a velocity is a speed in a direction, here west.
(f) Scalar: a length is a single number with its unit.
Scalars: (a), (c) and (f). Vectors: (b), (d) and (e).
A Vector as a Directed Line Segment
A vector is drawn as a directed line segment: a line segment with an arrowhead. Its length shows the magnitude of the vector, and the arrowhead shows its direction. The arrow starts at one point and ends at another, and the arrowhead is at the end. (Some books call the start of the arrow its tail and the end its head.) In a figure that is not on a grid, the arrowhead is often drawn part-way along the line instead; it still points from the start towards the end.
On a square grid, a vector is measured in squares. The arrow below starts at and ends at : it goes squares to the right and squares up.
Example 2: Drawing a displacement
On a map grid, each square stands for km, and north is up the page. A ferry sails in a straight line from a jetty to an island , which is km east and km north of . Draw the ferry's displacement as a directed line segment.
Solution
Mark . East is to the right and north is up, so is squares to the right of and squares up. Mark .
Draw the line segment from to , with the arrowhead at , the end.
The direction of the arrow is the way the ferry sails, and its length stands for how far it sails. (Lesson 5.3 shows how to work out that length.)
The arrow from to drawn above.
Naming a Vector
A vector can be named in three ways: by the points it goes from and to, by a single letter, or by its column vector (the next section). All three name the same arrow below.
Naming a vector
By its end points: is the vector from to . The start comes first, and the arrow over the letters points from the start to the end.
By a single letter: , printed in bold.
By its column vector: such as explained in the next section.
The magnitude (the length) of a vector is written with two upright lines: or . Lesson 5.3 shows how to work it out.
Writing a vector by hand
You cannot write in bold with a pen. By hand, draw a wavy line under the letter: write for .
Always put the arrow over . Without it, means the line segment from to , or its length, not the vector.
The order matters: goes from to , the other way. Lesson 5.2 compares the two.
Column Vectors
To go from the start of an arrow to its end along the grid lines, move across, then up or down. A column vector writes these two moves one above the other in brackets: the move across on top, the move up or down underneath.
Column vectors
The column vector means: move units across, then units up.
The top number, , is the horizontal component (or -component): positive to the right, negative to the left.
The bottom number, , is the vertical component (or -component): positive up, negative down.
A component of means no move that way.
To read a column vector from a grid, start at the start of the arrow. Count the squares across to below or above the end: that is the top number, with a minus sign if you went left. Then count the squares up or down to the end: that is the bottom number, with a minus sign if you went down. The arrow below goes squares to the left and squares up, so
A point or a vector?
is a point: a place on the grid, written in a row with a comma.
is a vector: a move of to the right and up, which can start anywhere. Always write a vector in a column, never in a row as .
Example 3: Reading column vectors from a grid
Write each of the vectors , , and as a column vector.
Solution
For each arrow, start at its start (the end without the arrowhead).
: squares to the right, then square up. So
: squares to the left, then squares up. Left is negative, so
: square to the right, then squares down. Down is negative, so
: squares to the left, then squares down. Both are negative, so
Example 4: One vector, three names
The arrow goes from the point to the point . Write the vector in three ways.
Solution
By its end points: it starts at and ends at , so it is .
By its letter: (by hand, ).
As a column vector: from , squares to the left, then squares up. So it is
Example 5: The vector between two points on axes
The points and are marked on the axes. Write as a column vector.
Solution
Start at . Across: from to is squares to the right.
Then down: from to is , that is squares down.
Each component is the end's coordinate minus the start's: across and up.
Drawing a Vector from Its Column Vector
Drawing a vector from its column vector
1. Mark the start.
2. Count the top number of squares across: to the right if it is positive, to the left if it is negative.
3. From there, count the bottom number of squares up if it is positive, down if it is negative. Mark the end.
4. Draw the line segment from the start to the end, with the arrowhead at the end.
Example 6: Drawing a vector from a point
Draw the vector starting at the point .
Solution
From , the top number is positive: count squares to the right.
The bottom number is negative: from there, count squares down, and mark the end.
Draw the arrow from to that point, with the arrowhead at the end.
The arrow from drawn above.
Example 7: A displacement as a column vector
A robot moves on a floor marked in squares of m, with north up the page. From its charging point it moves in a straight line to a shelf , which is m west and m south of . (a) Write as a column vector. (b) Draw it.
Solution
(a) West is to the left, so the top number is . South is down, so the bottom number is .
(b) From , count squares to the left and then squares down to , and draw the arrow from to .
(a) (b) The arrow from to drawn above.
Common Mistakes
- Writing a vector in a row, as . That is how a point is written. A vector is written in a column:
- Putting the move up or down on top. The move across is always the top number: squares up and square to the right is not
- Leaving out a minus sign. A move to the left or down is negative: squares to the left and up is
- Counting from the end of the arrow back to its start. Every sign then comes out the wrong way round. Always count from the start (the end without the arrowhead).
- Counting grid lines instead of squares. From to is squares, not .
- Writing with a bar over it, or with nothing over it, for the vector. The vector from to is , with an arrow.
Practice Questions
Work each question on paper before you open its solution. Write every vector as a column vector, and draw arrows with the arrowhead at the end. The questions get harder as you go.
Question 1
Say whether each quantity is a scalar or a vector. (a) a mass of kg (b) a velocity of m/s due north (c) a temperature of °C (d) a distance of km (e) a displacement of km due south (f) a time of minutes
ShowHide solution
(a) Scalar: a mass has size only.
(b) Vector: a speed with a direction, north.
(c) Scalar: a temperature has no direction.
(d) Scalar: a distance says how far, not which way.
(e) Vector: a displacement says how far and which way.
(f) Scalar: a time has no direction.
Scalars: (a), (c), (d) and (f). Vectors: (b) and (e).
Question 2
Describe in words the move that each column vector stands for. (a) (b) (c) (d)
ShowHide solution
(a) Top : units to the right. Bottom : units up.
(b) Top : units to the left. Bottom : units up.
(c) Top : no move across. Bottom : units down.
(d) Top : unit to the left. Bottom : units down.
(a) right, up (b) left, up (c) down, no move across (d) left, down
Question 3
Write each of the vectors , , and as a column vector.
ShowHide solution
: to the right, up:
: to the left, up:
: to the left, no move up or down:
: no move across, down:
Question 4
Name each of the two arrows by its end points, and write each as a column vector.
ShowHide solution
The first arrow starts at and ends at : it is . From , to the right and up.
The second arrow starts at and ends at : it is . From , to the right and down.
and
Question 5
Copy the grid with the points and . Draw starting at , and starting at .
ShowHide solution
: from , squares to the left, then squares up. Draw the arrow from to that point.
: from , squares to the right, then square down. Draw the arrow from to that point.
The arrows and drawn above.
Question 6
Siti writes the vector " units to the right and unit down" as . What is wrong, and how should she write it?
ShowHide solution
, in a row with a comma, is how a point is written: the point units to the right of the origin and unit below it.
A vector is a move, not a place, and is written in a column: the move across on top, the move up or down underneath.
She has written a point. The vector is
Question 7
Ken writes the vector in the figure as Explain his two mistakes, and write correctly.
ShowHide solution
From the start of , the arrow goes squares to the left and squares up.
Ken put the move up on top: the move across must be the top number.
He also left out the minus sign: a move to the left is negative.
He swapped the two moves and missed the minus sign.
Question 8
The points , and are on a grid with axes (plot them if it helps). Write and as column vectors.
ShowHide solution
: across, ; up, .
: across, ; up, , that is down.
and
Question 9
On a plan of a park, each square of the grid stands for m, and north is up the page. (a) A drone flies straight from its base to a point , which is m east and m south of . Write as a column vector in grid squares. (b) What move does the column vector stand for on this plan?
ShowHide solution
(a) m is squares, east, so to the right: the top number is .
m is squares, south, so down: the bottom number is .
(b) Top : squares to the left, that is m west. Bottom : squares up, that is m north.
(a) (b) m west and m north
Question 10
A map grid has squares of km, with north up the page. A hiker walks in a straight line from a campsite to a lookout , km west and km north of . From she walks km due east to a waterfall . (a) Write and as column vectors. (b) Draw the two walks on a grid. (c) Write as a column vector.
ShowHide solution
(a) West is to the left and north is up: Due east is to the right, with no move up or down:
(b) Mark , count to the left and up to , then to the right to .
(c) Count from to on the grid: squares to the right and squares up.
(a) (c)
Key Points
- A scalar has size only. A vector has size (its magnitude) and direction.
- A vector is drawn as a directed line segment: its length shows the magnitude and its arrowhead, at the end, the direction.
- A vector is named by its end points, (from to ), by a bold letter, (by hand, ), or by its column vector.
- In the column vector is the move across (right positive, left negative) and the move up (up positive, down negative).
- A point is written in a row with a comma, ; a vector in a column,
- To read a column vector, count squares from the start: across first, then up or down. To draw one, do the same and put the arrowhead at the end.