Area of a Segment
Find the area of a segment as a sector less a triangle, the area of a major segment, the length of a chord by the cosine rule or by halving, and the perimeter of a segment.
Before you start
- In lesson 6.2 you found the area of a triangle from two sides and the angle between them: area , for any angle, acute or obtuse.
- With sides m and m and between them, the area is
Chords and Segments
A chord is a straight line joining two points on a circle. A diameter is a chord through the centre, and it is the longest chord.
A segment is the region between a chord and an arc. Compare it with a sector: a sector is bounded by two radii and an arc; a segment by a chord and an arc.
A chord cuts the circle into two segments. The smaller one, with the minor arc, is the minor segment; the larger one, with the major arc, is the major segment. "The segment cut off by the chord " means the minor segment unless it says "major".
The Area of a Minor Segment
Draw the radii and . The sector is made of two parts: the triangle and the minor segment. So the segment is the sector less the triangle.
The triangle has two sides with the angle between them, so by lesson 6.2 its area is
Area of a segment
Area of a minor segment area of sector area of triangle
where is the angle at the centre in degrees: the calculator is in degree mode.
When is obtuse the formula is the same: by lesson 6.1, is positive, and the calculator gives it. When , and the triangle is simply .
Example 1: A minor segment
Points and lie on a circle with centre and radius cm, and . Find the area of the minor segment cut off by the chord . Use the button on your calculator.
Solution
Sector
Triangle (an obtuse angle: its sine is positive)
Segment
The area of the minor segment is (3 s.f.).
The Major Segment
The two segments together make the whole circle, so the major segment is the circle less the minor segment.
It is not the major sector less the triangle. The triangle lies inside the major segment, beside the major sector, so the major segment is the major sector plus the triangle. That gives a check.
Area of a major segment
Area of a major segment area of the minor segment
Check: major segment major sector triangle .
Example 2: A right angle at the centre
Points and lie on a circle with centre and radius cm, and . Find the areas of (a) the minor segment, (b) the major segment cut off by the chord . Leave your answers in terms of , then give them correct to 3 significant figures using the button on your calculator.
Solution
(a) The sector is a quarter circle, . The triangle has a right angle at , so it is .
Minor segment
(b) Major segment
Check: the major sector is and adding the triangle gives .
(a) (b)
The Length of a Chord, and the Perimeter of a Segment
The perimeter of a segment needs the length of its chord. There are two ways to find it, both from earlier lessons.
By the cosine rule (lesson 6.5). In triangle the chord faces the angle at , between two sides of length :
By halving (Secondary 2). Triangle is isosceles, since are radii. The line from to the midpoint of is perpendicular to and cuts the triangle into two equal right-angled triangles, so it halves the angle at too. In triangle , , so .
The perimeter of a segment
Perimeter of a segment arc chord
The minor arc for the minor segment, the major arc for the major segment. The radii are not part of a segment's boundary.
Example 3: The chord two ways, and the perimeter
Points and lie on a circle with centre and radius cm, and . Find (a) the length of the chord , (b) the perimeter of the minor segment. Use the button on your calculator.
Solution
(a) By the cosine rule:
The cosine of the obtuse angle is negative, so subtracting it adds. cm
By halving: the line from to the midpoint of halves the angle, so and the angle at is a right angle.
so cm, the same.
(b) Arc cm
Perimeter of the minor segment arc chord cm
(a) cm (b) The perimeter of the minor segment is cm.
Both ways give the same chord; use either. Halving is the quicker way back from a chord to the angle, as the next example shows.
Working Back from a Chord
When the chord and the radius are given, find first: by halving, or by the cosine rule for an angle (lesson 6.6). Keep the calculator's value of for the area.
Example 4: From a chord
A chord of length cm is drawn in a circle with centre and radius cm. Find (a) the angle that subtends at the centre, (b) the area of the minor segment. Use the button on your calculator.
Solution
(a) By halving: the midpoint of gives cm and a right angle at , so
so .
By the cosine rule, the same: negative, so is obtuse, and .
(b) Sector
Triangle
Check: cm, so the triangle is as base height.
Segment
A warning: with rounded first to , the segment comes out as , which is , wrong in the last figure. Keep , or better the calculator's full value.
(a) (b) The minor segment is .
An Examination-style Question
Example 5: The major segment and its perimeter
Points and lie on a circle with centre and radius cm, and . Find (a) the area of the major segment cut off by the chord , (b) the perimeter of the major segment. Use the button on your calculator.
Solution
(a) First the minor segment:
sector triangle
minor segment
Major segment
Check: the major sector is and
The wrong way, major sector less the triangle, gives about : far too small, because the triangle belongs to the major segment.
(b) Go round the boundary: the major arc and the chord.
Major arc cm; chord cm (by halving)
Perimeter cm
(a) The major segment is . (b) Its perimeter is cm.
Common Mistakes
- Finding the triangle as without . That is right only when .
- Taking with the calculator in radian mode. Check for D (degrees) on the display: in this lesson is in degrees.
- Finding the major segment as the major sector less the triangle. The triangle is part of the major segment: use the circle less the minor segment.
- Giving the perimeter of a segment without the chord, or with the two radii. A segment is bounded by its arc and its chord only.
- Rounding to 1 decimal place before finding the area. Keep the calculator's value.
- Using the half-angle from halving in the sector. The sector needs the whole angle .
- Writing as . Only is squared.
Practice Questions
Your calculator should be in degree mode. Give lengths and areas correct to 3 significant figures and angles to 1 decimal place, unless the question says otherwise. Each question says which value of to use. Try each question before opening its solution.
Question 1
Points and lie on a circle with centre and radius cm, and . Find the area of the minor segment cut off by . Use the button on your calculator.
ShowHide solution
Sector
Triangle
Segment
Question 2
A chord of a circle with centre and radius cm subtends an angle of at . Find the area of the minor segment. Take .
ShowHide solution
Sector
Triangle
Segment
Question 3
Points and lie on a circle with centre and radius cm, and . Find the area of the minor segment. Use the button on your calculator.
ShowHide solution
Sector
Triangle (an obtuse angle: its sine is positive)
Segment
Question 4
A chord of a circle with centre and radius cm subtends an angle of at . Find the length of .
ShowHide solution
By halving: the line from to the midpoint of is perpendicular to and halves the angle, so .
so
Or by the cosine rule: , the same.
cm
Question 5
Points and lie on a circle with centre and radius cm, and . Use the button on your calculator. Find the areas of (a) the minor segment, (b) the major segment. (c) Wei Jie writes: "Major segment Explain his mistake.
ShowHide solution
(a) Sector triangle segment
(b) Major segment
(c) He took the triangle away from the major sector. The triangle is part of the major segment, so it must be added: as in (b).
(a) (b) (c) The triangle should be added to the major sector, not subtracted.
Question 6
A chord of a circle with centre and radius cm subtends an angle of at . Find the perimeter of the minor segment. Use the button on your calculator.
ShowHide solution
Arc cm
Chord cm (by halving)
Perimeter cm
cm
Question 7
A chord of length cm is drawn in a circle with radius cm. Find (a) the angle the chord subtends at the centre, (b) the area of the minor segment. Use the button on your calculator.
ShowHide solution
(a) By halving: so and .
(b) Sector
The line from the centre to the middle of the chord is cm, so the triangle is
Segment
(a) (b)
Question 8
A chord of a circle with centre is as long as the radius, cm. (a) Explain why . (b) Find the area of the minor segment. Use the button on your calculator.
ShowHide solution
(a) cm, so triangle is equilateral and each of its angles is .
(b) Sector triangle
Segment
(a) Triangle is equilateral. (b)
Question 9
A round table top has a radius of cm. A straight edge is cut along a chord of length cm, and the piece cut off is the minor segment. Find (a) the angle at the centre , (b) the area of the piece cut off. Use the button on your calculator.
ShowHide solution
(a) By halving: , so and .
(b) Sector
The line from to the middle of is cm, so the triangle is
Segment
(a) (b)
Question 10
A circular pipe has an inner radius of cm. Water lies in it, less than half full, and the water surface subtends an angle of at the centre of the cross-section. Find (a) the area of the cross-section of the water, (b) the width of the water surface. Use the button on your calculator.
ShowHide solution
(a) The water is the minor segment below .
Sector triangle
Water
(b) The width is the chord (by halving).
(a) (b) cm
Key Points
- A chord joins two points on a circle; a segment is the region between a chord and an arc. A chord cuts a circle into a minor and a major segment.
- Minor segment sector triangle with the calculator in degree mode.
- Major segment minor segment (check: major sector triangle).
- A chord by the cosine rule, or by halving, .
- Perimeter of a segment arc chord.
- From a chord and a radius: keep the full value of for the area.