Skip to the page
Home Campus
Start free

Radian Measure

Measure an angle in radians, from the arc as long as the radius; change between radians and degrees, and set the calculator to radian mode.

Before you start

  • In lesson 8.1 an arc was a fraction of the circumference: arc length =θ360∘×2πr.= \frac{\theta}{360^{\circ}} \times 2\pi r\text{.} On a circle of radius 66 cm, an angle of 60∘60^{\circ} at the centre cuts off an arc of 16×12π=2π\frac{1}{6} \times 12\pi = 2\pi cm.
  • So the angle at the centre and the arc go together: double the angle and the arc doubles. This lesson turns that round and measures the angle by its arc.

What Is a Radian?

Degrees divide a full turn into 360360 equal parts, a number chosen long ago. A radian measures an angle by the circle itself: mark off an arc as long as the radius, and the angle it makes at the centre is one radian.

One radian

One radian (11 rad) is the angle subtended at the centre of a circle by an arc equal in length to the radius.

11 rad ≈57.3∘\approx 57.3^{\circ}

A circle with centre O and radius r; the arc AB is also r long, and the angle AOB is 1 radianOAB1 radrrr

One radian is the same angle on every circle: on a larger circle the radius and the arc grow together, and the angle stays the same. It is a little less than 60∘60^{\circ}. If the chord ABAB were rr long, the triangle OABOAB would be equilateral and the angle 60∘60^{\circ}; but the arc is rr long, and the chord, the straight way from AA to BB, is shorter, so the angle is a little less.

An arc twice as long as the radius subtends 22 radians at the centre; an arc half as long as the radius subtends 12\frac{1}{2} radian. The size of an angle in radians is the number of radii that fit along its arc.

A Full Turn Is 2π Radians

The whole circumference is 2πr2\pi r long, so arcs of length rr fit round it 2πr÷r=2π2\pi r \div r = 2\pi times, a little over 66 times (2π≈6.282\pi \approx 6.28). Each of them subtends 11 radian at the centre, so the full turn is 2π2\pi radians.

A circle with centre O and radius r; six arcs, each r long, are marked off in turn round the circumference, and a short piece of it is left overOrrrrrrr

Radians and degrees

A full turn: 2π2\pi radians =360∘= 360^{\circ}

A half turn: π\pi radians =180∘= 180^{\circ}, written π=180∘\pi = 180^{\circ}

So 11 rad =180∘π≈57.3∘= \dfrac{180^{\circ}}{\pi} \approx 57.3^{\circ} and 1∘=π1801^{\circ} = \dfrac{\pi}{180}, about 0.0170.017 rad.

A circle with centre O and radius r; the diameter AB makes the straight angle AOB, π radians, that is 180°, and the upper semicircle, of length πr, is picked outOABπ = 180°rπr

How to write an angle in radians

A multiple of π\pi is written with no unit: π3\frac{\pi}{3}, 3π4\frac{3\pi}{4}, 2π2\pi. Do not write "π\pi rad".

A decimal is written with "rad" after it: 2.52.5 rad, 1.311.31 rad.

An angle in degrees always carries its degree sign: 60∘60^{\circ}. A bare 6060 would be 6060 radians, nearly ten full turns.

Converting Between Degrees and Radians

Every conversion comes from π=180∘\pi = 180^{\circ}. One degree is π180\frac{\pi}{180} radians, and one radian is 180π\frac{180}{\pi} degrees.

Converting

Degrees to radians: multiply the number of degrees by π180\dfrac{\pi}{180}.

Radians to degrees: multiply the number of radians by 180π\dfrac{180}{\pi}. For a multiple of π\pi, this is the same as putting 180∘180^{\circ} in place of π\pi.

Example 1: Degrees to radians, in terms of π

Convert 135∘135^{\circ} to radians, giving the answer in terms of π\pi.

Solution

135∘=135×π180=135π180135^{\circ} = 135 \times \dfrac{\pi}{180} = \dfrac{135\pi}{180}

Divide 135135 and 180180 by their HCF, 4545: 135π180=3π4.\dfrac{135\pi}{180} = \dfrac{3\pi}{4}\text{.}

Check: 135∘135^{\circ} is three quarters of 180∘180^{\circ}, so it is three quarters of π\pi.

A sector with an angle of 3π/4 radians, that is 135°, at OOAB3π/4 = 135°

135∘=3π4135^{\circ} = \dfrac{3\pi}{4}

Example 2: Radians to degrees

Convert 7π4\dfrac{7\pi}{4} to degrees.

Solution

7π4×180π=7×1804=315∘\dfrac{7\pi}{4} \times \dfrac{180}{\pi} = \dfrac{7 \times 180}{4} = 315^{\circ}

Or put 180∘180^{\circ} in place of π\pi: 7×180∘4=315∘.\dfrac{7 \times 180^{\circ}}{4} = 315^{\circ}\text{.}

Check: 7π4\frac{7\pi}{4} is a little less than 2π2\pi, and 315∘315^{\circ} is a little less than 360∘360^{\circ}.

7π4=315∘\dfrac{7\pi}{4} = 315^{\circ}

The angles met most often, in degrees, in terms of π\pi, and as decimals (from the π\pi button on the calculator, to 3 significant figures):

DegreesRadiansRadians (decimal)
30∘30^{\circ}π6\frac{\pi}{6}0.5240.524
45∘45^{\circ}π4\frac{\pi}{4}0.7850.785
60∘60^{\circ}π3\frac{\pi}{3}1.051.05
90∘90^{\circ}π2\frac{\pi}{2}1.571.57
120∘120^{\circ}2π3\frac{2\pi}{3}2.092.09
135∘135^{\circ}3π4\frac{3\pi}{4}2.362.36
180∘180^{\circ}π\pi3.143.14
270∘270^{\circ}3π2\frac{3\pi}{2}4.714.71
360∘360^{\circ}2π2\pi6.286.28

An angle that is not a simple multiple of π\pi is given as a decimal. Give an angle in degrees to 1 decimal place and an angle in radians to 3 significant figures, and keep the calculator's full value until the last line.

Example 3: A decimal in radians to degrees

Convert 2.32.3 rad to degrees, correct to 1 decimal place. Use the π\pi button on your calculator.

Solution

2.3×180π=414π=131.780…∘2.3 \times \dfrac{180}{\pi} = \dfrac{414}{\pi} = 131.780\ldots^{\circ}

With π=3.142\pi = 3.142: 414÷3.142=131.763…∘,414 \div 3.142 = 131.763\ldots^{\circ}\text{,} which also gives 131.8∘131.8^{\circ}.

Check: 2.32.3 rad is 2.3×57.3∘2.3 \times 57.3^{\circ}, about 132∘132^{\circ}: more than a right angle, less than a straight angle.

A sector with an angle of 2.3 radians, about 131.8°, at OOAB2.3 rad ≈ 131.8°

2.32.3 rad =131.8∘= 131.8^{\circ} (1 d.p.)

Example 4: Degrees to a decimal in radians

Convert 75∘75^{\circ} to radians, (a) in terms of π\pi, (b) correct to 3 significant figures.

Solution

(a) 75×π180=75π180=5π12,75 \times \dfrac{\pi}{180} = \dfrac{75\pi}{180} = \dfrac{5\pi}{12}\text{,} dividing by the HCF, 1515.

(b) 5π12=1.308…\dfrac{5\pi}{12} = 1.308\ldots (with π=3.142\pi = 3.142, 1.309…1.309\ldots: the same to 3 significant figures).

(a) 75∘=5π1275^{\circ} = \dfrac{5\pi}{12} (b) 75∘=1.3175^{\circ} = 1.31 rad (3 s.f.)

The Calculator in Radian Mode

A calculator works out sin⁡\sin, cos⁡\cos and tan⁡\tan in the angle unit it is set to. On most school calculators, press SHIFT, then SETUP, and choose Rad for radians or Deg for degrees. The display shows a small R in radian mode and a small D in degree mode.

The same keys give very different answers in the two modes. In radian mode sin⁡π6=0.5\sin\frac{\pi}{6} = 0.5, the sine of 30∘30^{\circ}; in degree mode the calculator takes π6\frac{\pi}{6} as about 0.524∘0.524^{\circ} and gives about 0.009140.00914.

Check the mode

Check the mode before every sine or cosine: in degree mode sin⁡1.2\sin 1.2 is about 0.02090.0209; in radian mode it is about 0.9320.932.

Angles in degrees: degree mode (D). Angles in radians: radian mode (R). Adding, multiplying and dividing need no mode; only sin⁡\sin, cos⁡\cos, tan⁡\tan and their inverses do.

Example 5: Sines and cosines of angles in radians

With the calculator in radian mode, find, correct to 3 significant figures, (a) sin⁡1.1\sin 1.1, (b) cos⁡0.5\cos 0.5. (c) Find the acute angle θ\theta, in radians, for which sin⁡θ=0.75\sin\theta = 0.75.

Solution

Set the calculator to radian mode and check that the display shows R.

(a) sin⁡1.1=0.89120…\sin 1.1 = 0.89120\ldots

(b) cos⁡0.5=0.87758…\cos 0.5 = 0.87758\ldots

(c) θ=sin⁡−10.75\theta = \sin^{-1} 0.75. In radian mode the calculator gives the angle in radians: θ=0.84806…\theta = 0.84806\ldots

Check (c): in degree mode sin⁡−10.75=48.590…∘,\sin^{-1} 0.75 = 48.590\ldots^{\circ}\text{,} and 48.590…×π180=0.848…,48.590\ldots \times \frac{\pi}{180} = 0.848\ldots\text{,} the same angle.

(a) 0.8910.891 (b) 0.8780.878 (c) θ=0.848\theta = 0.848 rad

How Large Is an Angle in Radians?

Two angles give a quick sense of size: a right angle is π2≈1.57\frac{\pi}{2} \approx 1.57 and a straight angle is π≈3.14\pi \approx 3.14. So an angle in radians is acute when it is less than π2\frac{\pi}{2} (about 1.5711.571), obtuse between π2\frac{\pi}{2} and π\pi (about 3.1423.142), and reflex between π\pi and 2π2\pi. An angle of 2.42.4 rad is obtuse; an angle of 11 rad is about 57∘57^{\circ}, not 1∘1^{\circ}.

To compare angles given in both units, change them all to one unit first.

Example 6: Ordering angles

Arrange these angles in order of size, smallest first: 100∘100^{\circ}, 1.61.6 rad, 2π5\dfrac{2\pi}{5}, 1.81.8 rad. Which of them are obtuse?

Solution

Change each to radians: 100∘=100×π180=1.745…100^{\circ} = 100 \times \frac{\pi}{180} = 1.745\ldots rad, and 2π5=1.256…\frac{2\pi}{5} = 1.256\ldots rad.

In order: 1.256…1.256\ldots, 1.61.6, 1.745…1.745\ldots, 1.81.8.

A right angle is π2=1.570…\frac{\pi}{2} = 1.570\ldots, so 1.61.6 rad, 100∘100^{\circ} and 1.81.8 rad are obtuse, and 2π5\frac{2\pi}{5} (that is, 72∘72^{\circ}) is acute.

2π5\dfrac{2\pi}{5}, 1.61.6 rad, 100∘100^{\circ}, 1.81.8 rad; all but 2π5\dfrac{2\pi}{5} are obtuse.

Common Mistakes

  • Thinking that 11 rad is about 1∘1^{\circ}. One radian is about 57.3∘57.3^{\circ}, nearly 60∘60^{\circ}: a full turn is only about 6.286.28 rad.
  • Multiplying by the fraction upside down. Degrees to radians is ×π180\times \frac{\pi}{180}, and the number gets much smaller (90∘90^{\circ} is about 1.571.57). If 90∘90^{\circ} comes out as about 51575157, the fraction was 180π\frac{180}{\pi}.
  • Leaving the calculator in the wrong mode. In degree mode sin⁡1.2≈0.0209\sin 1.2 \approx 0.0209; in radian mode sin⁡1.2≈0.932\sin 1.2 \approx 0.932. Look for the D or R on the display before every sine or cosine.
  • Writing "π\pi rad", or a decimal with no unit. Write π3\frac{\pi}{3}, 2.52.5 rad and 60∘60^{\circ}.
  • Mixing units in one calculation: π6+30∘\frac{\pi}{6} + 30^{\circ} is not π6+30\frac{\pi}{6} + 30. Change one first: π6+π6=π3,\frac{\pi}{6} + \frac{\pi}{6} = \frac{\pi}{3}\text{,} or 30∘+30∘=60∘30^{\circ} + 30^{\circ} = 60^{\circ}.
  • Rounding an angle before using it again. Keep the calculator's full value and round once, at the end.

Practice Questions

Give angles in degrees to 1 decimal place and angles in radians to 3 significant figures unless the question says otherwise. Use the π\pi button on your calculator. Try each question before opening its solution.

Question 1

Convert to radians, giving each answer in terms of π\pi: (a) 30∘30^{\circ} (b) 45∘45^{\circ} (c) 120∘120^{\circ} (d) 150∘150^{\circ} (e) 225∘225^{\circ} (f) 300∘300^{\circ}

ShowHide solution

Multiply by π180\frac{\pi}{180} and simplify the fraction.

(a) 30π180=π6\frac{30\pi}{180} = \frac{\pi}{6} (b) 45π180=π4\frac{45\pi}{180} = \frac{\pi}{4} (c) 120π180=2π3\frac{120\pi}{180} = \frac{2\pi}{3}

(d) 150π180=5π6\frac{150\pi}{180} = \frac{5\pi}{6} (e) 225π180=5π4\frac{225\pi}{180} = \frac{5\pi}{4} (f) 300π180=5π3\frac{300\pi}{180} = \frac{5\pi}{3}

(a) π6\frac{\pi}{6} (b) π4\frac{\pi}{4} (c) 2π3\frac{2\pi}{3} (d) 5π6\frac{5\pi}{6} (e) 5π4\frac{5\pi}{4} (f) 5π3\frac{5\pi}{3}

Question 2

Convert to degrees: (a) π9\dfrac{\pi}{9} (b) 3π5\dfrac{3\pi}{5} (c) 4π3\dfrac{4\pi}{3} (d) 11π6\dfrac{11\pi}{6}

ShowHide solution

Put 180∘180^{\circ} in place of π\pi.

(a) 180∘9=20∘\frac{180^{\circ}}{9} = 20^{\circ} (b) 3×180∘5=108∘\frac{3 \times 180^{\circ}}{5} = 108^{\circ} (c) 4×180∘3=240∘\frac{4 \times 180^{\circ}}{3} = 240^{\circ} (d) 11×180∘6=330∘\frac{11 \times 180^{\circ}}{6} = 330^{\circ}

Check (d): 11π6\frac{11\pi}{6} is π6\frac{\pi}{6} short of 2π2\pi, and 330∘330^{\circ} is 30∘30^{\circ} short of 360∘360^{\circ}.

(a) 20∘20^{\circ} (b) 108∘108^{\circ} (c) 240∘240^{\circ} (d) 330∘330^{\circ}

Question 3

Convert to degrees, correct to 1 decimal place: (a) 0.70.7 rad (b) 1.41.4 rad (c) 2.82.8 rad

ShowHide solution

Multiply by 180π\frac{180}{\pi}.

(a) 0.7×180π=40.107…∘0.7 \times \frac{180}{\pi} = 40.107\ldots^{\circ} (b) 1.4×180π=80.214…∘1.4 \times \frac{180}{\pi} = 80.214\ldots^{\circ} (c) 2.8×180π=160.428…∘2.8 \times \frac{180}{\pi} = 160.428\ldots^{\circ}

With π=3.142\pi = 3.142 the same answers come out: 40.101…∘40.101\ldots^{\circ}, 80.203…∘80.203\ldots^{\circ}, 160.407…∘160.407\ldots^{\circ}

(a) 40.1∘40.1^{\circ} (b) 80.2∘80.2^{\circ} (c) 160.4∘160.4^{\circ}

Question 4

Convert to radians, correct to 3 significant figures: (a) 20∘20^{\circ} (b) 70∘70^{\circ} (c) 110∘110^{\circ} (d) 200∘200^{\circ}

ShowHide solution

Multiply by π180\frac{\pi}{180}.

(a) 20π180=0.34906…\frac{20\pi}{180} = 0.34906\ldots (b) 70π180=1.2217…\frac{70\pi}{180} = 1.2217\ldots (c) 110π180=1.9198…\frac{110\pi}{180} = 1.9198\ldots (d) 200π180=3.4906…\frac{200\pi}{180} = 3.4906\ldots

(a) 0.3490.349 rad (b) 1.221.22 rad (c) 1.921.92 rad (d) 3.493.49 rad

Question 5

On a circle, (a) an arc is three times as long as the radius, (b) another arc is a quarter as long as the radius. Find the angle each arc subtends at the centre, in radians and in degrees.

ShowHide solution

Each length of one radius along the arc gives one radian at the centre.

(a) Three radii long: 33 rad. In degrees, 3×180π=171.887…∘3 \times \frac{180}{\pi} = 171.887\ldots^{\circ} (with π=3.142\pi = 3.142, 171.865…∘171.865\ldots^{\circ})

(b) A quarter of a radius long: 0.250.25 rad. In degrees, 0.25×180π=14.323…∘0.25 \times \frac{180}{\pi} = 14.323\ldots^{\circ} (with π=3.142\pi = 3.142, 14.322…∘14.322\ldots^{\circ})

(a) 33 rad =171.9∘= 171.9^{\circ} (b) 0.250.25 rad =14.3∘= 14.3^{\circ}

Question 6

(a) With the calculator in radian mode, find, correct to 3 significant figures, sin⁡0.3\sin 0.3, tan⁡0.9\tan 0.9 and cos⁡1.4\cos 1.4. (b) Mei Ling works out sin⁡1.3\sin 1.3, where 1.31.3 is in radians, and gets 0.02270.0227. What has she done wrong, and what is the right value?

ShowHide solution

(a) sin⁡0.3=0.29552…\sin 0.3 = 0.29552\ldots, tan⁡0.9=1.2601…\tan 0.9 = 1.2601\ldots, cos⁡1.4=0.16996…\cos 1.4 = 0.16996\ldots

(b) Her calculator is in degree mode: sin⁡1.3∘=0.02268…,\sin 1.3^{\circ} = 0.02268\ldots\text{,} which she rounded to 0.02270.0227. In radian mode, sin⁡1.3=0.96355…\sin 1.3 = 0.96355\ldots

(a) 0.2960.296, 1.261.26, 0.1700.170 (b) She used degree mode; sin⁡1.3=0.964\sin 1.3 = 0.964.

Question 7

Find the acute angle θ\theta, in radians, for which (a) cos⁡θ=0.25\cos\theta = 0.25 (b) tan⁡θ=2\tan\theta = 2 (c) sin⁡θ=0.9\sin\theta = 0.9.

ShowHide solution

With the calculator in radian mode:

(a) θ=cos⁡−10.25=1.3181…\theta = \cos^{-1} 0.25 = 1.3181\ldots (b) θ=tan⁡−12=1.1071…\theta = \tan^{-1} 2 = 1.1071\ldots (c) θ=sin⁡−10.9=1.1197…\theta = \sin^{-1} 0.9 = 1.1197\ldots

Each is less than π2=1.57…\frac{\pi}{2} = 1.57\ldots, so each is acute, as it should be.

(a) 1.321.32 rad (b) 1.111.11 rad (c) 1.121.12 rad

Question 8

Say whether each angle is acute, obtuse or reflex: (a) 1.21.2 rad (b) 2.92.9 rad (c) 3.53.5 rad (d) 5π6\dfrac{5\pi}{6} (e) 1.51.5 rad

ShowHide solution

A right angle is π2≈1.571\frac{\pi}{2} \approx 1.571 and a straight angle is π≈3.142\pi \approx 3.142.

(a) 1.2<1.5711.2 < 1.571: acute. (b) 2.92.9 is between 1.5711.571 and 3.1423.142: obtuse. (c) 3.5>3.1423.5 > 3.142: reflex.

(d) 5π6=150∘\frac{5\pi}{6} = 150^{\circ}: obtuse. (e) 1.5<1.5711.5 < 1.571: acute, though only just: 1.51.5 rad is about 86∘86^{\circ}.

(a) acute (b) obtuse (c) reflex (d) obtuse (e) acute

Question 9

Arrange in order of size, smallest first: 11 rad, 50∘50^{\circ}, π4\dfrac{\pi}{4}, 0.90.9 rad.

ShowHide solution

Change each to radians: 50∘=50π180=0.872…50^{\circ} = \frac{50\pi}{180} = 0.872\ldots rad, and π4=0.785…\frac{\pi}{4} = 0.785\ldots rad.

In order: 0.785…0.785\ldots, 0.872…0.872\ldots, 0.90.9, 11.

π4\dfrac{\pi}{4}, 50∘50^{\circ}, 0.90.9 rad, 11 rad

Question 10

Two angles of a triangle are π4\dfrac{\pi}{4} and π3\dfrac{\pi}{3}. Find the third angle in radians, in terms of π\pi, and in degrees.

ShowHide solution

The angles of a triangle add up to 180∘180^{\circ}, that is π\pi.

Third angle =π−π4−π3=12π−3π−4π12=5π12.= \pi - \frac{\pi}{4} - \frac{\pi}{3} = \frac{12\pi - 3\pi - 4\pi}{12} = \frac{5\pi}{12}\text{.}

In degrees: 5×180∘12=75∘.\frac{5 \times 180^{\circ}}{12} = 75^{\circ}\text{.} Check: 45∘+60∘+75∘=180∘.45^{\circ} + 60^{\circ} + 75^{\circ} = 180^{\circ}\text{.}

5π12\dfrac{5\pi}{12}, that is 75∘75^{\circ}

Question 11

A Ferris wheel has 4040 capsules spaced equally round its rim. (a) Find the angle at the centre between two capsules next to each other, in radians in terms of π\pi, and in degrees. (b) A capsule rides from the lowest point of the wheel to the highest. Through what angle, in radians, does the wheel turn?

ShowHide solution

(a) The full turn, 2π2\pi, is shared equally among 4040 gaps: 2π40=π20\frac{2\pi}{40} = \frac{\pi}{20}. In degrees, 360∘40=9∘\frac{360^{\circ}}{40} = 9^{\circ} (check: 180∘20=9∘\frac{180^{\circ}}{20} = 9^{\circ}).

(b) From the lowest point to the highest is half a turn: π\pi.

(a) π20\dfrac{\pi}{20}, that is 9∘9^{\circ} (b) π\pi

Question 12

Through what angle, in radians, does (a) the minute hand of a clock turn in 1515 minutes, (b) the minute hand turn in 4040 minutes, (c) the hour hand turn in 11 hour? Give each in terms of π\pi.

ShowHide solution

(a) The minute hand makes a full turn, 2π2\pi, in 6060 minutes. In 1515 minutes: 1560×2π=π2.\frac{15}{60} \times 2\pi = \frac{\pi}{2}\text{.}

(b) In 4040 minutes: 4060×2π=4π3\frac{40}{60} \times 2\pi = \frac{4\pi}{3} (that is 240∘240^{\circ}, a reflex angle).

(c) The hour hand makes a full turn in 1212 hours. In 11 hour: 112×2π=π6.\frac{1}{12} \times 2\pi = \frac{\pi}{6}\text{.}

(a) π2\dfrac{\pi}{2} (b) 4π3\dfrac{4\pi}{3} (c) π6\dfrac{\pi}{6}

Key Points

  • One radian is the angle subtended at the centre of a circle by an arc equal in length to the radius; 11 rad ≈57.3∘\approx 57.3^{\circ}.
  • The circumference holds 2π2\pi arcs as long as the radius, so a full turn is 2π2\pi radians: 2π=360∘2\pi = 360^{\circ} and π=180∘\pi = 180^{\circ}.
  • Degrees to radians: multiply by π180\frac{\pi}{180}. Radians to degrees: multiply by 180π\frac{180}{\pi}, or put 180∘180^{\circ} in place of π\pi.
  • Write a multiple of π\pi with no unit (π3\frac{\pi}{3}), a decimal with "rad" (2.52.5 rad), and degrees with ∘^{\circ}. Radians to 3 significant figures, degrees to 1 decimal place.
  • A right angle is π2≈1.57\frac{\pi}{2} \approx 1.57 and a straight angle π≈3.14\pi \approx 3.14.
  • For sin⁡\sin, cos⁡\cos and tan⁡\tan of an angle in radians, set the calculator to radian mode (R); check the mode every time.

Previous lesson8.3 Area of a Segment Next lesson8.5 Arc Length and Sector Area in Radians

All Secondary 3 (Grade 9) lessons

Home Campus has lessons for Primary 3 to Secondary 4, and practice questions with worked solutions and worksheets for Primary 3 to Secondary 2. Register free to practise and keep track of progress.

This lesson follows the Singapore Secondary 3 syllabus and was checked question by question before it was published. Spotted a mistake? Tell us.