Problems with Arcs, Sectors and Segments
Solve problems that join arcs, sectors, segments and triangles, in degrees or in radians: cones made from sectors, pendulums, windows, wipers and overlapping circles.
Before you start
- In Secondary 2 you saw that the curved surface of a cone opens out into a sector of radius , the slant height, whose arc is as long as the base circle, ; its area is . A cone of radius cm and slant height cm has a curved surface of
- Lessons 8.1 to 8.5 gave every formula this lesson uses; here they are put together.
Degrees or Radians? The Question Decides
Read how the question gives its angle. An angle in degrees goes into the formulas of lessons 8.1 to 8.3, with the calculator in degree mode. An angle in radians (a decimal such as rad, or a multiple of such as ), or an answer asked for in radians, goes into the formulas of lesson 8.5, with the calculator in radian mode.
The angle θ in degrees (calculator in degree mode)
Arc length
Area of a sector
Area of a minor segment
The angle θ in radians (calculator in radian mode)
Arc length:
Area of a sector:
Area of a minor segment
Never mix the two
Never put degrees into : is not the arc of . Never put radians into . When a question mixes them, change one first (lesson 8.4).
Check the mode before every sine or cosine: in degree mode is about ; in radian mode it is about .
Planning a Composite Figure
Name the pieces. A shaded region is usually made of sectors, segments, triangles, rectangles and the ring-shaped part of a sector between two arcs on the same centre. Decide which pieces to add and which to take away, as in Secondary 1.
The perimeter piece by piece. Go round the boundary and add each piece once: each arc with its own radius and angle, each straight edge once. A line inside the region is not part of its perimeter.
Find the angle first. Many figures give lengths, not the angle at the centre. Find it from a right-angled triangle (a chord halved, as in lesson 8.3) or by the cosine rule (lesson 6.6), in degrees or radians as the question asks.
"Show that" questions
When a question says "show that rad, correct to 4 significant figures", work it to at least 5 figures () before you write the given value.
In the later parts, use the calculator's full value, not the rounded .
A Sector Folded into a Cone
When a sector is folded so that its two straight edges meet, it makes a hollow cone. The centre of the sector becomes the apex; its radius becomes the slant height of the cone; its arc goes once round the base, so the arc is the circumference of the base, .
Example 1: The cone from a sector
A sector of radius cm and angle is folded so that meets , making a hollow cone with apex . Find (a) the base radius of the cone, (b) its height , (c) its curved surface area, in terms of . Use the button on your calculator.
Solution
(a) The arc becomes the circumference of the base. Arc cm.
So , and cm.
(b) The slant height is the sector's radius, cm. Let be the centre of the base. In the right-angled triangle : so
(c) The curved surface is the sector itself:
Secondary 2's formula gives the same:
(a) cm (b) cm (3 s.f.) (c)
Why the curved surface is πrl
Secondary 2 quoted the curved surface area without its proof. The sector is part of a circle of radius , whose circumference is and whose area is .
The sector's arc is , so the sector is the fraction of that circle.
So its area is .
Swings, Arches and Wipers
Example 2: A pendulum
A pendulum hangs from a point on a string cm long. Its bob swings from to , and the string turns through . Use the button on your calculator. Find (a) the distance the bob travels from to , (b) the straight-line distance , (c) how far above its lowest point the bob is when it is at .
Solution
(a) The bob moves along an arc of radius cm, in degrees: cm.
(b) The triangle is isosceles ( cm), so the line from to the midpoint of is perpendicular to and halves the angle, on each side. Half of is , so cm, a little less than the arc.
(c) A pendulum swings equally far either side of its lowest point, so is straight below , halfway along the arc , and . Let be the foot of the perpendicular from to .
In the right-angled triangle , cm. Then cm.
Keep the full value of : the subtraction leaves only three figures (with rounded to , would come out as ).
(a) cm cm (b) cm (c) cm (3 s.f.)
Example 3: An arched window
A window is made of a rectangle , cm wide and cm high, with an arch on top: the arc of a circle with centre and radius cm, where is below . (a) Show that rad, correct to 4 significant figures. (b) Find the area of glass in the window. (c) Find the perimeter of the window.
Solution
(a) The triangle is isosceles ( cm), so the line from to the midpoint of is perpendicular to and halves . cm.
In the right-angled triangle , In radian mode,
rad (4 s.f.), as required.
(b) The glass is the rectangle and the segment above . Segment
Glass
(c) Go round the boundary: the arc , then , and . Arc cm.
Perimeter cm. The chord is inside the window, so it is not part of the perimeter.
(b) (3 s.f.), about (c) cm (3 s.f.)
Example 4: A windscreen wiper
A windscreen wiper arm is cm long and turns about . Its rubber blade , cm long, is fixed along the outer end of the arm, so it wipes from cm to cm from . The arm turns through . Find the area of glass wiped. Use the button on your calculator.
Solution
The region wiped is the sector of radius cm less the sector of radius cm, both with at .
Area
(with , ).
Use the right radius for each arc: cm for the outer one, cm for the inner one, not cm.
The area wiped is (3 s.f.).
Overlapping Circles, and Working Back in Radians
Example 5: Two overlapping circles
Two circles, each of radius cm, have centres and that are cm apart. They meet at and . Find (a) and , in radians, (b) the area of the part common to both circles, (c) the perimeter of that part.
Solution
(a) The triangle is isosceles ( cm), so the line from to the midpoint of is perpendicular to , and cm.
In the right-angled triangle , . In radian mode,
The figure is symmetrical about , so rad.
(b) The common part is two equal segments, each cut off by the chord : one from the circle with centre , one from the circle with centre .
One segment
Common part
(c) The boundary is two arcs, each of radius cm with an angle of rad at its own centre ( at , and the same at ): cm.
(a) rad, rad (b) (c) cm (3 s.f.)
Radians often make a question that works back shorter, because and have no and no in them.
Example 6: A sector from its perimeter
A sector has an angle of rad at the centre and a perimeter of cm. Find its radius and its area.
Solution
Perimeter : , so and .
Area
In degrees the same angle is , and the work is longer: before can be found.
The radius is cm and the area is .
Common Mistakes
- Putting degrees into or , or radians into . Look at how the question gives the angle.
- Leaving the calculator in the wrong mode for a sine or cosine. Check for D or R every time.
- A perimeter that counts a line inside the region (the chord under a window's arch), or misses an arc. Go round the boundary.
- Using the wrong circle for an arc: the outer edge of a wiper's path has radius cm, not cm or cm.
- In a cone made from a sector, taking the sector's radius as the base radius, or setting the arc equal to . The sector's radius is the slant height ; its arc is the base's circumference .
- Rounding an angle in a "show that" and then using the rounded value: use the calculator's value, not .
- Finding one segment where the common part of two circles has two.
Practice Questions
Give answers correct to 3 significant figures unless they are exact or the question says otherwise, and angles in degrees to 1 decimal place. Use the button on your calculator. Try each question before opening its solution.
Question 1
A pendulum cm long swings through an angle of rad. Find the length of the arc its bob travels, and the straight-line distance between the two ends of the swing.
ShowHide solution
The angle is in radians: arc cm.
The triangle formed by the string at its two ends is isosceles; halving it, half the distance is (radian mode). Distance cm.
Arc cm; straight-line distance cm
Question 2
A sector of radius cm and angle is made into a cone by joining its two straight edges. Find the cone's (a) base radius, (b) height, (c) curved surface area, (d) volume.
ShowHide solution
(a) Arc This is the base's circumference: , so cm.
(b) The slant height is cm, so and cm.
(c) Curved surface (the sector: the same).
(d) Volume
(a) cm (b) cm (c) (d)
Question 3
A cone has base radius cm and slant height cm. Its curved surface is cut along a slant height and laid flat. Find the angle of the sector it makes, in degrees and in radians.
ShowHide solution
The sector has radius cm (the slant height) and its arc is the base's circumference, cm.
In degrees: so and .
In radians: , so . Check:
, that is
Question 4
A wiper turns through an angle of and wipes the part of the glass from cm to cm from its pivot. Find the area wiped.
ShowHide solution
Area
Question 5
A badge is made of three arcs. Each arc has its centre at a corner of an equilateral triangle of side cm and joins the other two corners. Find the area and the perimeter of the badge.
ShowHide solution
The badge is the triangle and three equal segments, one on each side. Each angle of the triangle is .
Triangle
One segment
Area
Perimeter: three arcs, each cm, so cm.
Area ; perimeter cm cm
Question 6
Water stands cm deep in a horizontal pipe of radius cm, as in the cross-section. The water surface is cm below the centre . Find (a) in radians, in terms of , (b) the area of the water's cross-section.
ShowHide solution
(a) Let be the midpoint of , so is perpendicular to (the triangle is isosceles) and cm.
In the right-angled triangle , In degree mode , and (lesson 8.4), so .
(b) The water is the minor segment: (with , ).
(a) (b)
Question 7
The minute hand of a clock is cm long. In minutes, find (a) the angle it turns through, in radians, in terms of , (b) the distance its tip moves.
ShowHide solution
(a) A full turn, , takes minutes:
(b) cm.
(a) (b) cm cm
Question 8
A chord of length cm is drawn in a circle with centre and radius cm. (a) Show that rad, correct to 4 significant figures. (b) Find the area of the minor segment. (c) Find the perimeter of the minor segment.
ShowHide solution
(a) The line from to the midpoint of is perpendicular to and halves ; cm. , so in radian mode and rad (4 s.f.).
(b) Segment
(c) Arc cm; perimeter arc chord cm.
(b) (c) cm
Question 9
A flower bed is a sector of radius m with an angle of . A path m wide runs round its arc: the region between the arc and an arc of radius m about the same centre, ending on the two radii produced. Find the area of the path, in terms of and correct to 3 significant figures.
ShowHide solution
The path is the sector of radius m less the sector of radius m, both with .
Area
Question 10
Spot the fault: "The arc of on a circle of radius cm is cm." Give the right length.
ShowHide solution
The angle is in degrees, but needs it in radians. (An arc of cm on a circle whose whole circumference is cm, about cm, cannot be right.)
In degrees: Or in radians: , and . (with , also ).
Degrees were put into ; the arc is cm cm.
Key Points
- The question decides: an angle in degrees goes into the formulas (degree mode); an angle in radians into , and (radian mode).
- Name the pieces of a region and decide what to add and what to take away.
- For a perimeter, go round the boundary: each arc with its own radius and angle, each straight edge once, no inside lines.
- Find the angle at the centre first when a figure gives lengths: halve the isosceles triangle, or use the cosine rule. In a "show that", work to 5 figures and carry the calculator's value.
- A sector folded into a cone: its radius is the slant height , its arc is the base's circumference , and its area is the curved surface .
- The common part of two equal overlapping circles is two equal segments.