Skip to the page
Home Campus
Start free

Arc Length and Sector Area in Radians

With the angle at the centre in radians, find an arc by s = rθ, a sector by A = ½r²θ and a segment by ½r²(θ − sin θ), and work back to the radius or the angle.

Before you start

  • In lessons 8.1 and 8.2, with the angle θ\theta at the centre in degrees: arc length =θ360∘×2πr= \frac{\theta}{360^{\circ}} \times 2\pi r and area of a sector =θ360∘×πr2.= \frac{\theta}{360^{\circ}} \times \pi r^{2}\text{.} A sector of radius 66 cm with an angle of 60∘60^{\circ} has an arc of 16×12π=2π\frac{1}{6} \times 12\pi = 2\pi cm and an area of 16×36π=6π cm2.\frac{1}{6} \times 36\pi = 6\pi\text{ cm}^{2}\text{.}
  • In lesson 8.3, area of a segment == area of sector −- area of triangle, the triangle being 12r2sin⁡θ\frac{1}{2}r^{2}\sin\theta. In lesson 8.4, a full turn is 2π2\pi radians, so π=180∘\pi = 180^{\circ}.

Arc Length: s = rθ

In degrees, an arc is the fraction θ360∘\frac{\theta}{360^{\circ}} of the circumference, because a full turn is 360∘360^{\circ}. In radians a full turn is 2π2\pi, so the same fraction is θ2π\frac{\theta}{2\pi}, and

arc length =θ2π×2πr=rθ.= \dfrac{\theta}{2\pi} \times 2\pi r = r\theta\text{.}

This is also what lesson 8.4 said a radian is: each radian at the centre takes an arc one radius long, so θ\theta radians take an arc θ\theta radii long, rθr\theta.

Arc length, θ in radians

Arc length: s=rθs = r\theta, where θ\theta is in radians.

Perimeter of a sector =r+r+rθ=2r+rθ= r + r + r\theta = 2r + r\theta (the two radii and the arc).

A circle with centre O and radius r; the radii OA and OB make an angle θ, in radians, at O, and the minor arc AB, of length s = rθ, is picked outOABθrs = rθ

The formula is short because the angle is in radians. With an angle in degrees, either change it to radians first (lesson 8.4) or use θ360∘×2πr\frac{\theta}{360^{\circ}} \times 2\pi r as in lesson 8.1. Never put degrees into rθr\theta: 6×40=2406 \times 40 = 240 is not the arc of 40∘40^{\circ} on a circle of radius 66 cm.

Example 1: An arc from the radius and the angle

A circle has radius 88 cm. Find the length of the arc that subtends an angle of 2.52.5 rad at the centre.

A circle with centre O and radius 8 cm; the radii OA and OB make an angle of 2.5 radians at O, and the minor arc AB is picked outOAB2.5 rad8 cm?

Solution

The angle is in radians, so s=rθ=8×2.5=20.s = r\theta = 8 \times 2.5 = 20\text{.}

Check with lesson 8.1: 2.52.5 rad =143.239…∘= 143.239\ldots^{\circ}, and 143.239…360×16π=20.0.\frac{143.239\ldots}{360} \times 16\pi = 20.0\text{.}

The arc is 2020 cm long.

Example 2: An angle in terms of π

A sector has radius 1212 cm and an angle of 5π6\dfrac{5\pi}{6} at the centre. Find the length of its arc, in terms of π\pi and correct to 3 significant figures.

Solution

s=rθ=12×5π6=10π=31.415…s = r\theta = 12 \times \dfrac{5\pi}{6} = 10\pi = 31.415\ldots

Check with lesson 8.1: 5π6=150∘\frac{5\pi}{6} = 150^{\circ}, and 150∘360∘×24π=10π.\frac{150^{\circ}}{360^{\circ}} \times 24\pi = 10\pi\text{.}

The arc is 10π10\pi cm ≈31.4\approx 31.4 cm.

Example 3: The angle from an arc

An arc of length 1717 cm is on a circle of radius 1010 cm. Find the angle θ\theta that the arc subtends at the centre, in radians and in degrees.

A circle with centre O and radius 10 cm; the minor arc AB is 17 cm long and the angle AOB, in radians, is θOABθ10 cm17 cm

Solution

s=rθs = r\theta, so 17=10θ17 = 10\theta and θ=1710=1.7\theta = \dfrac{17}{10} = 1.7.

In degrees: 1.7×180π=97.402…∘1.7 \times \dfrac{180}{\pi} = 97.402\ldots^{\circ} (with π=3.142\pi = 3.142, 97.390…∘97.390\ldots^{\circ}: the same to 1 decimal place).

θ=1.7\theta = 1.7 rad =97.4∘= 97.4^{\circ} (1 d.p.)

Example 4: The perimeter of a sector

Find the perimeter of a sector of radius 99 cm with an angle of 1.41.4 rad at the centre.

A sector OAB of radius 9 cm with an angle of 1.4 radians at O; its perimeter is asked forOAB1.4 rad9 cmPerimeter = ?

Solution

Arc AB=rθ=9×1.4=12.6AB = r\theta = 9 \times 1.4 = 12.6 cm.

Go round the boundary, OAOA, then the arc ABAB, then BOBO: 9+12.6+9=30.69 + 12.6 + 9 = 30.6.

The perimeter is 30.630.6 cm.

Area of a Sector: A = ½r²θ

In the same way, a sector with an angle θ\theta in radians is the fraction θ2π\frac{\theta}{2\pi} of the whole circle, whose area is πr2\pi r^{2}:

area of sector =θ2π×πr2=12r2θ.= \dfrac{\theta}{2\pi} \times \pi r^{2} = \dfrac{1}{2}r^{2}\theta\text{.}

Area of a sector, θ in radians

Area of a sector: A=12r2θA = \frac{1}{2}r^{2}\theta, where θ\theta is in radians.

Example 5: The area of a sector

Find the area of a sector of radius 1212 cm with an angle of π3\dfrac{\pi}{3} at the centre, in terms of π\pi and correct to 3 significant figures.

A shaded sector OAB of radius 12 cm with an angle of π/3 radians at O; its area is asked forOABπ/312 cm?

Solution

A=12r2θ=12×122×π3=144π6=24π=75.398…A = \frac{1}{2}r^{2}\theta = \frac{1}{2} \times 12^{2} \times \dfrac{\pi}{3} = \dfrac{144\pi}{6} = 24\pi = 75.398\ldots

With π=3.142\pi = 3.142: 24×3.142=75.408,24 \times 3.142 = 75.408\text{,} which also gives 75.475.4.

Check with lesson 8.2: π3=60∘\frac{\pi}{3} = 60^{\circ}, and 60∘360∘×144π=24π.\frac{60^{\circ}}{360^{\circ}} \times 144\pi = 24\pi\text{.}

The area is 24π cm2≈75.4 cm2.24\pi\text{ cm}^{2} \approx 75.4\text{ cm}^{2}\text{.}

Example 6: The radius from the area

A sector with an angle of 1.11.1 rad at the centre has an area of 40 cm240\text{ cm}^{2}. Find its radius.

A sector OAB of radius r cm with an angle of 1.1 radians at O and an area of 40 cm²OAB1.1 radr cm40 cm²

Solution

12×r2×1.1=40,\frac{1}{2} \times r^{2} \times 1.1 = 40\text{,} so 0.55r2=400.55r^{2} = 40.

r2=400.55=72.727…,r^{2} = \dfrac{40}{0.55} = 72.727\ldots\text{,} and r=72.727…=8.528…,r = \sqrt{72.727\ldots} = 8.528\ldots\text{,} taking the positive root, since a radius is positive.

Check: 12×8.528…2×1.1=40.0.\frac{1}{2} \times 8.528\ldots^{2} \times 1.1 = 40.0\text{.}

The radius is 8.538.53 cm (3 s.f.).

Area of a Segment: ½r²(θ − sin θ)

In lesson 8.3 the minor segment cut off by a chord ABAB was the sector OABOAB less the triangle OABOAB. The triangle has two sides rr with the angle θ\theta between them, so its area is 12r2sin⁡θ\frac{1}{2}r^{2}\sin\theta (lesson 6.2). With θ\theta in radians the sector is 12r2θ\frac{1}{2}r^{2}\theta, so

area of segment =12r2θ−12r2sin⁡θ=12r2(θ−sin⁡θ).= \frac{1}{2}r^{2}\theta - \frac{1}{2}r^{2}\sin\theta = \frac{1}{2}r^{2}(\theta - \sin\theta)\text{.}

Area of a segment, θ in radians

Area of a minor segment =12r2(θ−sin⁡θ),= \frac{1}{2}r^{2}(\theta - \sin\theta)\text{,} where θ\theta is the angle at the centre in radians, less than π\pi, and sin⁡θ\sin\theta is found with the calculator in radian mode.

Area of a major segment =πr2−= \pi r^{2} - area of the minor segment.

Check the mode

Check the mode before every sine or cosine: in degree mode sin⁡1.2\sin 1.2 is about 0.02090.0209; in radian mode it is about 0.9320.932.

Work out the bracket (θ−sin⁡θ)(\theta - \sin\theta) first, keeping its full value, then multiply by 12r2\frac{1}{2}r^{2}.

Example 7: A minor segment

The chord ABAB of a circle with centre OO and radius 99 cm subtends an angle of 1.41.4 rad at OO. Find the area of the minor segment.

A circle with centre O and radius 9 cm; the radii OA and OB make an angle of 1.4 radians at O, and the minor segment cut off by the chord AB is shadedOAB1.4 rad9 cm?

Solution

In radian mode, sin⁡1.4=0.98544…\sin 1.4 = 0.98544\ldots

Area of segment =12×92×(1.4−0.98544…)=40.5×0.41455…=16.789…= \frac{1}{2} \times 9^{2} \times (1.4 - 0.98544\ldots) = 40.5 \times 0.41455\ldots = 16.789\ldots

The same in two parts: sector =12×81×1.4=56.7,= \frac{1}{2} \times 81 \times 1.4 = 56.7\text{,} triangle =12×81×sin⁡1.4=39.910…,= \frac{1}{2} \times 81 \times \sin 1.4 = 39.910\ldots\text{,} and 56.7−39.910…=16.789…56.7 - 39.910\ldots = 16.789\ldots

The minor segment has an area of 16.8 cm216.8\text{ cm}^{2} (3 s.f.).

Example 8: An angle in terms of π

In a circle with centre OO and radius 66 cm, ∠AOB=π3\angle AOB = \dfrac{\pi}{3}. Find the area of the minor segment cut off by the chord ABAB. Use the π\pi button on your calculator.

Solution

π3=1.0471…\frac{\pi}{3} = 1.0471\ldots and, in radian mode, sin⁡π3=0.86602…\sin\frac{\pi}{3} = 0.86602\ldots

Area =12×62×(1.0471…−0.86602…)=18×0.18117…=3.2610…= \frac{1}{2} \times 6^{2} \times (1.0471\ldots - 0.86602\ldots) = 18 \times 0.18117\ldots = 3.2610\ldots

With π=3.142\pi = 3.142 the answer is 3.262…3.262\ldots, also 3.263.26.

Check in degrees, as in lesson 8.3: π3=60∘\frac{\pi}{3} = 60^{\circ}; sector =60∘360∘×36π=18.849…,= \frac{60^{\circ}}{360^{\circ}} \times 36\pi = 18.849\ldots\text{,} triangle =12×36×sin⁡60∘=15.588…,= \frac{1}{2} \times 36 \times \sin 60^{\circ} = 15.588\ldots\text{,} and 18.849…−15.588…=3.261…18.849\ldots - 15.588\ldots = 3.261\ldots

The minor segment has an area of 3.26 cm23.26\text{ cm}^{2} (3 s.f.).

Example 9: Minor and major segments, and a perimeter

A chord ABAB of a circle with centre OO and radius 1010 cm subtends an angle of 22 rad at OO. Find (a) the area of the minor segment, (b) the area of the major segment, (c) the length of the chord ABAB and the perimeter of the minor segment.

A circle with centre O and radius 10 cm; the chord AB subtends an angle of 2 radians at O, and the minor segment it cuts off is shadedOAB2 rad10 cm

Solution

(a) In radian mode, sin⁡2=0.90929…\sin 2 = 0.90929\ldots, so the minor segment =12×102×(2−0.90929…)=50×1.0907…=54.535… cm2.= \frac{1}{2} \times 10^{2} \times (2 - 0.90929\ldots) = 50 \times 1.0907\ldots = 54.535\ldots\text{ cm}^{2}\text{.}

(b) Major segment == circle −- minor segment =100π−54.535…=314.159…−54.535…=259.62…= 100\pi - 54.535\ldots = 314.159\ldots - 54.535\ldots = 259.62\ldots (with π=3.142\pi = 3.142, 259.66…259.66\ldots).

Check: the major segment is the major sector, with angle 2π−22\pi - 2, plus the triangle OABOAB: 12×100×(2π−2)+12×100×sin⁡2=214.15…+45.464…=259.62…\frac{1}{2} \times 100 \times (2\pi - 2) + \frac{1}{2} \times 100 \times \sin 2 = 214.15\ldots + 45.464\ldots = 259.62\ldots

(c) The triangle OABOAB is isosceles (OA=OBOA = OB), so the line from OO to the midpoint MM of ABAB is perpendicular to ABAB and halves the angle: ∠AOM=1\angle AOM = 1 rad. Then AM=10sin⁡1=8.4147…AM = 10\sin 1 = 8.4147\ldots (radian mode) and AB=2×8.4147…=16.829…AB = 2 \times 8.4147\ldots = 16.829\ldots cm.

Arc AB=rθ=10×2=20AB = r\theta = 10 \times 2 = 20 cm, so the perimeter of the minor segment == arc ++ chord =20+16.829…=36.829…= 20 + 16.829\ldots = 36.829\ldots

(a) 54.5 cm254.5\text{ cm}^{2} (b) 260 cm2260\text{ cm}^{2} (c) AB=16.8AB = 16.8 cm; the perimeter is 36.836.8 cm (3 s.f.).

Common Mistakes

  • Putting degrees into s=rθs = r\theta or A=12r2θA = \frac{1}{2}r^{2}\theta. For 40∘40^{\circ} on a circle of radius 66 cm, 6×40=2406 \times 40 = 240 cm is far too long. Change 40∘40^{\circ} to 2π9\frac{2\pi}{9} first, or use θ360∘×2πr\frac{\theta}{360^{\circ}} \times 2\pi r.
  • Taking sin⁡θ\sin\theta in degree mode in 12r2(θ−sin⁡θ)\frac{1}{2}r^{2}(\theta - \sin\theta). In degree mode sin⁡1.4\sin 1.4 is about 0.02440.0244, and the "segment" comes out almost as large as the sector.
  • Leaving out the 12\frac{1}{2} or the square: A=12r2θA = \frac{1}{2}r^{2}\theta, not r2θr^{2}\theta, 12rθ\frac{1}{2}r\theta or (12r)2θ(\frac{1}{2}r)^{2}\theta.
  • Giving the arc rθr\theta as the perimeter of a sector. Go round the boundary: the two radii as well, 2r+rθ2r + r\theta.
  • Putting a reflex angle into 12r2(θ−sin⁡θ)\frac{1}{2}r^{2}(\theta - \sin\theta). In this course the formula is for the minor segment, θ\theta less than π\pi. For a major segment, find the minor segment and take it from πr2\pi r^{2}.
  • Rounding an angle found from θ=sr\theta = \frac{s}{r} before using it again. Keep the calculator's full value.

Practice Questions

Give answers correct to 3 significant figures unless they are exact or the question says otherwise. Use the π\pi button on your calculator, and radian mode for every sine. Try each question before opening its solution.

Question 1

A sector has radius 77 cm and an angle of 1.61.6 rad at the centre. Find its arc length and its area.

ShowHide solution

Arc =rθ=7×1.6=11.2= r\theta = 7 \times 1.6 = 11.2 cm.

Area =12r2θ=12×49×1.6=39.2 cm2.= \frac{1}{2}r^{2}\theta = \frac{1}{2} \times 49 \times 1.6 = 39.2\text{ cm}^{2}\text{.}

Arc 11.211.2 cm; area 39.2 cm239.2\text{ cm}^{2}

Question 2

A sector has radius 1010 cm and an angle of 3π4\dfrac{3\pi}{4} at the centre. Find its arc length and its area, each in terms of π\pi and correct to 3 significant figures.

ShowHide solution

Arc =10×3π4=7.5π=23.561…= 10 \times \frac{3\pi}{4} = 7.5\pi = 23.561\ldots cm.

Area =12×100×3π4=37.5π=117.80… cm2.= \frac{1}{2} \times 100 \times \frac{3\pi}{4} = 37.5\pi = 117.80\ldots\text{ cm}^{2}\text{.}

Arc 7.5π7.5\pi cm ≈23.6\approx 23.6 cm; area 37.5π cm2≈118 cm237.5\pi\text{ cm}^{2} \approx 118\text{ cm}^{2}

Question 3

Find the angle at the centre, in radians, of (a) an arc of length 1818 cm on a circle of radius 1212 cm, (b) a sector of radius 88 cm with an area of 40 cm240\text{ cm}^{2}.

ShowHide solution

(a) 12θ=1812\theta = 18, so θ=1812=1.5\theta = \frac{18}{12} = 1.5.

(b) 12×82×θ=40\frac{1}{2} \times 8^{2} \times \theta = 40, so 32θ=4032\theta = 40 and θ=1.25\theta = 1.25.

(a) 1.51.5 rad (b) 1.251.25 rad

Question 4

A sector with an angle of 0.750.75 rad at the centre has an area of 54 cm254\text{ cm}^{2}. Find its radius.

ShowHide solution

12×r2×0.75=54,\frac{1}{2} \times r^{2} \times 0.75 = 54\text{,} so 0.375r2=540.375r^{2} = 54 and r2=144r^{2} = 144.

r=12r = 12, the positive root.

r=12r = 12 cm

Question 5

A paper fan opens out into a sector of radius 2525 cm with an angle of 2.42.4 rad at the centre. Find the length of its curved edge and the area of the sector.

ShowHide solution

Curved edge =rθ=25×2.4=60= r\theta = 25 \times 2.4 = 60 cm.

Area =12×252×2.4=12×625×2.4=750 cm2.= \frac{1}{2} \times 25^{2} \times 2.4 = \frac{1}{2} \times 625 \times 2.4 = 750\text{ cm}^{2}\text{.}

The curved edge is 6060 cm long and the area is 750 cm2750\text{ cm}^{2}.

Question 6

A sector of radius 55 cm has a perimeter of 1818 cm. Find the angle at the centre in radians, and the area of the sector.

ShowHide solution

Perimeter =2r+rθ= 2r + r\theta: 10+5θ=1810 + 5\theta = 18, so 5θ=85\theta = 8 and θ=1.6\theta = 1.6.

Area =12×25×1.6=20 cm2.= \frac{1}{2} \times 25 \times 1.6 = 20\text{ cm}^{2}\text{.}

θ=1.6\theta = 1.6 rad; the area is 20 cm220\text{ cm}^{2}.

Question 7

A garden sprinkler turns through 2.22.2 rad and waters the ground up to 66 m from it, a sector of radius 66 m. Find the area of ground it waters and the length of the curved edge of that area.

ShowHide solution

Area =12×62×2.2=18×2.2=39.6 m2.= \frac{1}{2} \times 6^{2} \times 2.2 = 18 \times 2.2 = 39.6\text{ m}^{2}\text{.}

Curved edge =6×2.2=13.2= 6 \times 2.2 = 13.2 m.

39.6 m239.6\text{ m}^{2}; the curved edge is 13.213.2 m long.

Question 8

A circle has centre OO and radius 88 cm. Find the area of the minor segment cut off by a chord ABAB when (a) ∠AOB=1.1\angle AOB = 1.1 rad, (b) ∠AOB=3π4\angle AOB = \dfrac{3\pi}{4}.

ShowHide solution

Radian mode. 12r2=12×64=32.\frac{1}{2}r^{2} = \frac{1}{2} \times 64 = 32\text{.}

(a) 32×(1.1−sin⁡1.1)=32×(1.1−0.89120…)=32×0.20879…=6.6813…32 \times (1.1 - \sin 1.1) = 32 \times (1.1 - 0.89120\ldots) = 32 \times 0.20879\ldots = 6.6813\ldots

(b) 3π4=2.3561…\frac{3\pi}{4} = 2.3561\ldots and sin⁡3π4=0.70710…,\sin\frac{3\pi}{4} = 0.70710\ldots\text{,} so 32×(2.3561…−0.70710…)=32×1.6490…=52.770…32 \times (2.3561\ldots - 0.70710\ldots) = 32 \times 1.6490\ldots = 52.770\ldots (with π=3.142\pi = 3.142, 52.787…52.787\ldots).

(a) 6.68 cm26.68\text{ cm}^{2} (b) 52.8 cm252.8\text{ cm}^{2}

Question 9

A chord ABAB of a circle with centre OO and radius 88 cm subtends an angle of 1.51.5 rad at OO. Find the areas of the minor and the major segments.

ShowHide solution

Minor segment =12×64×(1.5−sin⁡1.5)=32×(1.5−0.99749…)=16.080… cm2.= \frac{1}{2} \times 64 \times (1.5 - \sin 1.5) = 32 \times (1.5 - 0.99749\ldots) = 16.080\ldots\text{ cm}^{2}\text{.}

Major segment =64π−16.080…=201.06…−16.080…=184.98…= 64\pi - 16.080\ldots = 201.06\ldots - 16.080\ldots = 184.98\ldots (with π=3.142\pi = 3.142, 185.00…185.00\ldots).

Minor segment 16.1 cm216.1\text{ cm}^{2}; major segment 185 cm2185\text{ cm}^{2}

Question 10

A chord ABAB of a circle with centre OO and radius 55 cm subtends an angle of 1.61.6 rad at OO. Find the length of ABAB and the perimeter of the minor segment.

ShowHide solution

The line from OO to the midpoint MM of ABAB is perpendicular to ABAB and halves the angle (the triangle OABOAB is isosceles), so ∠AOM=0.8\angle AOM = 0.8 rad.

AM=5sin⁡0.8=3.5867…AM = 5\sin 0.8 = 3.5867\ldots (radian mode), so AB=7.1735…AB = 7.1735\ldots cm.

Arc AB=5×1.6=8AB = 5 \times 1.6 = 8 cm. Perimeter =8+7.1735…=15.173…= 8 + 7.1735\ldots = 15.173\ldots

AB=7.17AB = 7.17 cm; the perimeter is 15.215.2 cm.

Question 11

A chord ABAB of a circle with centre OO and radius 1010 cm subtends an angle of 11 rad at OO. Wei Jie works out the area of the minor segment as 12×102×(1−sin⁡1)\frac{1}{2} \times 10^{2} \times (1 - \sin 1) and gets 49.1 cm249.1\text{ cm}^{2}. What has he done wrong? Find the right area.

ShowHide solution

His calculator was in degree mode: sin⁡1∘=0.017452…,\sin 1^{\circ} = 0.017452\ldots\text{,} and 50×(1−0.017452…)=49.127…50 \times (1 - 0.017452\ldots) = 49.127\ldots

A sign that something is wrong: the sector itself is only 12×100×1=50 cm2,\frac{1}{2} \times 100 \times 1 = 50\text{ cm}^{2}\text{,} so a segment of 49.1 cm249.1\text{ cm}^{2} would leave almost nothing for the triangle.

In radian mode, sin⁡1=0.84147…\sin 1 = 0.84147\ldots, and 50×(1−0.84147…)=50×0.15852…=7.9264…50 \times (1 - 0.84147\ldots) = 50 \times 0.15852\ldots = 7.9264\ldots

He used degree mode; the area is 7.93 cm27.93\text{ cm}^{2}.

Question 12

A sector has a perimeter of 2020 cm and an area of 24 cm224\text{ cm}^{2}. Its radius is rr cm and its angle at the centre θ\theta rad. (a) Show that r2−10r+24=0r^{2} - 10r + 24 = 0. (b) Find the two possible sectors.

ShowHide solution

(a) Perimeter: 2r+rθ=202r + r\theta = 20, so rθ=20−2rr\theta = 20 - 2r.

From the perimeter, θ=20−2rr\theta = \dfrac{20 - 2r}{r}. Put this into 12r2θ=24\frac{1}{2}r^{2}\theta = 24: 12r2×20−2rr=24,\frac{1}{2}r^{2} \times \dfrac{20 - 2r}{r} = 24\text{,} so 12r(20−2r)=24,\frac{1}{2}r(20 - 2r) = 24\text{,} 10r−r2=2410r - r^{2} = 24 and r2−10r+24=0r^{2} - 10r + 24 = 0.

(b) (r−4)(r−6)=0(r - 4)(r - 6) = 0, so r=4r = 4 or r=6r = 6.

When r=4r = 4: 4θ=20−8=124\theta = 20 - 8 = 12, θ=3\theta = 3. When r=6r = 6: 6θ=20−12=86\theta = 20 - 12 = 8, θ=43=1.333…\theta = \frac{4}{3} = 1.333\ldots

Check r=4r = 4, θ=3\theta = 3: perimeter 8+12=208 + 12 = 20, area 12×16×3=24\frac{1}{2} \times 16 \times 3 = 24. Check r=6r = 6, θ=43\theta = \frac{4}{3}: perimeter 12+8=2012 + 8 = 20, area 12×36×43=24.\frac{1}{2} \times 36 \times \frac{4}{3} = 24\text{.}

Radius 44 cm with angle 33 rad, or radius 66 cm with angle 1.331.33 rad (3 s.f.).

Key Points

  • With θ\theta in radians, an arc or a sector is the fraction θ2π\frac{\theta}{2\pi} of the whole circle.
  • Arc length: s=rθs = r\theta. Area of a sector: A=12r2θA = \frac{1}{2}r^{2}\theta. Both need θ\theta in radians.
  • Perimeter of a sector =2r+rθ= 2r + r\theta.
  • Area of a minor segment =12r2(θ−sin⁡θ),= \frac{1}{2}r^{2}(\theta - \sin\theta)\text{,} with sin⁡θ\sin\theta in radian mode; a major segment is πr2\pi r^{2} less the minor segment.
  • Working back: θ=sr\theta = \frac{s}{r}; from the area, r2=2Aθr^{2} = \frac{2A}{\theta}, then the positive square root.
  • An angle in degrees goes into the θ360∘\frac{\theta}{360^{\circ}} formulas, or is changed to radians first.

Previous lesson8.4 Radian Measure Next lesson8.6 Problems with Arcs, Sectors and Segments

All Secondary 3 (Grade 9) lessons

Home Campus has lessons for Primary 3 to Secondary 4, and practice questions with worked solutions and worksheets for Primary 3 to Secondary 2. Register free to practise and keep track of progress.

This lesson follows the Singapore Secondary 3 syllabus and was checked question by question before it was published. Spotted a mistake? Tell us.