Speed-Time Graphs
How to read a speed-time graph: acceleration and deceleration from its gradient, the distance travelled from the area under it, average speed, an unknown time or speed, and drawing the graph from a description.
Before you start
- In Secondary 1 you changed km/h to m/s by dividing by (or multiplying by ): km/h m/s.
- Area of a trapezium (sum of parallel sides) height, . The area of a triangle is base height.
- In lesson 6.5 the gradient of a distance-time graph was the speed.
What a Speed-Time Graph Shows
A speed-time graph shows time across and speed up, usually in seconds and metres per second. It looks like a distance-time graph, but it says something different: its height is the speed at each moment.
Where the speed rises steadily, from to m/s in s, it rises by m/s every second. That rate is the acceleration: metres per second per second, written m/s². It is the gradient of the graph, in the units of the vertical axis per unit of the horizontal axis.
Reading a speed-time graph
A horizontal piece: the speed does not change. The object moves at a constant speed; it is not at rest. (At rest, the graph is on the time axis: speed .)
A piece going up: the speed rises. Its gradient is the acceleration, in m/s².
A piece going down: the speed falls, and the gradient is negative. The object decelerates: a gradient of m/s² is a deceleration of m/s² (an acceleration of m/s²).
Acceleration = change in speed ÷ time taken. A straight piece means the speed changes uniformly (at a constant rate).
Example 1: Acceleration and deceleration
The speed-time graph of a car is shown. It starts from rest, speeds up uniformly to m/s in s, keeps that speed for s, then slows down uniformly to rest in s.
(a) Find the acceleration in the first s.
(b) Find the deceleration in the last s.
(c) Find the speed of the car when .
Solution
(a) Acceleration m/s².
(b) From s to s the speed falls from m/s to in s. Gradient so the deceleration is m/s².
(c) At the car has been slowing for s, losing m/s each second: speed m/s.
The graph agrees: s is halfway from to , so the speed is halfway from down to .
(a) m/s² (b) m/s², to 3 significant figures (c) m/s.
The Area Under the Graph Is the Distance
At a constant speed, distance = speed × time. On a speed-time graph that is the height of a horizontal piece times its width: the area of the rectangle under it. A car at m/s for s goes m.
When the speed changes uniformly, the shape under the piece is a triangle or a trapezium, and its area is still the distance: the speed is on average halfway between its two ends, so the distance is that average speed times the time, which is the area. Cut the region under the graph into rectangles, triangles and trapeziums, or treat it as one trapezium when it is one.
Distance and average speed from a speed-time graph
Distance travelled = the area under the speed-time graph.
With speed in m/s and time in s, the area is in metres.
Average speed = total distance travelled ÷ total time taken.
Example 2: The distance and the average speed
For the car in Example 1, find (a) the total distance it travels, (b) its average speed for the s.
Solution
(a) Cut the area under the graph into three pieces.
Speeding up: triangle m.
Steady: rectangle m.
Slowing down: triangle m.
Total m.
Or, in one step: the whole region is a trapezium with parallel sides (the top, from to s) and (the time axis), and height . Area m.
(b) Average speed m/s.
(a) m (b) m/s.
An Unknown Time or Speed
When the distance is given and a time or a speed is not, write the area under the graph with the unknown in it, make it equal to the distance, and solve the equation.
A graph with an unknown is sketched not to scale, with the known values and the unknown marked on the axes: the picture shows the shape, not the size.
Example 3: An unknown time
A train starts from rest and accelerates uniformly to m/s in s. It travels at m/s for s, then decelerates uniformly to rest in s. Altogether it travels m. Find .
The sketch is not to scale.
Solution
Area while speeding up: m.
Area at constant speed: m.
Area while slowing down: m.
The total area is the distance:
so .
Check: m.
: the train travels at m/s for s (2 minutes).
Drawing the Graph from a Description
Mark time across and speed up. Plot a point at each moment the motion changes, with the speed then: the start ( if it starts from rest), the end of speeding up, the end of the steady part, the stop. Join the points with straight lines, since each change is uniform.
In this lesson, speed-time graphs use m/s and seconds. The unit of an area is the speed's unit times the time's unit: m/s × s = m, and km/h × h = km. If the speed is in km/h and the time in seconds, change the speed to m/s first (divide by ); if the time is in minutes, change it to hours or seconds first.
Example 4: A cyclist
A cyclist moving at m/s speeds up uniformly to m/s in s. She rides at m/s for s, then brakes uniformly to rest in s.
(a) Draw the speed-time graph.
(b) Find her acceleration and her deceleration.
(c) Find the distance she travels in the s.
Solution
(a) The points are , , and . She does not start from rest, so the graph starts at on the speed axis.
(b) Acceleration m/s². Deceleration m/s².
(c) The first piece is a trapezium with parallel sides and and width : m.
The steady piece: m. The last piece, a triangle: m.
Distance m.
(b) Acceleration m/s², deceleration m/s² (c) m.
Example 5: Change km/h to m/s first
A bus travelling at km/h brakes uniformly and comes to rest in s. Find (a) its deceleration, (b) the distance it travels while braking.
Solution
km/h m/s.
(a) Deceleration m/s².
(b) Distance = the area of the triangle m.
Working with km/h and seconds would give , which is neither metres nor kilometres.
(a) m/s² (b) m.
Common Mistakes
- Reading a horizontal line as "at rest". On a speed-time graph it means a constant speed; at rest is speed , on the time axis.
- Taking the gradient as the distance. The gradient is the acceleration; the distance is the area under the graph.
- Finding the area of one piece only. The distance for the whole journey is the area under the whole graph.
- Mixing km/h with seconds in one area. Change km/h to m/s first.
- Writing a deceleration as a negative number. The gradient is m/s²; the deceleration is m/s².
- Using the height of the graph at the end as the distance. The height is a speed.
Practice Questions
Speeds are in m/s and times in s unless the question says otherwise. The questions get harder as you go.
Question 1
The speed-time graph of a motorcycle is shown.
(a) Find its acceleration in the first s.
(b) For how long does it travel at a constant speed?
(c) Find its deceleration.
ShowHide solution
(a) Acceleration m/s².
(b) The horizontal piece runs from s to s: s.
(c) From s to s the speed falls from m/s to : deceleration m/s².
(a) m/s² (b) s (c) m/s².
Question 2
For the motorcycle in Question 1, find (a) its speed when , (b) the two times when its speed is m/s, (c) the total distance it travels.
ShowHide solution
(a) At s it has slowed for s at m/s²: speed m/s.
(b) Speeding up at m/s², it reaches m/s after s. Slowing down, it falls from to m/s, a fall of m/s, in s after s: at s.
(c) The region under the graph is a trapezium with parallel sides (from to s) and , and height : m.
(a) m/s (b) At s and at s (c) m.
Question 3
The graph shows a cyclist's speed over the last s of a training ride: she passes a marker at m/s, speeds up to m/s, holds it, then brakes to a stop.
(a) Find the distance she rides in each part, and the total distance.
(b) Find her average speed for the s.
ShowHide solution
(a) From to s, a trapezium: m. From to s, a rectangle: m. From to s, a triangle: m.
Total m.
(b) Average speed m/s.
(a) m, m, m; m in all (b) About m/s, to 3 significant figures.
Question 4
Say whether each statement about a speed-time graph is true or false.
(a) A horizontal line means the object is at rest.
(b) The area under the graph is the distance travelled.
(c) The steeper a rising line, the greater the acceleration.
(d) A line going down means the object is moving backwards.
ShowHide solution
(a) False: a horizontal line is a constant speed. At rest is speed .
(b) True.
(c) True: the gradient is the acceleration.
(d) False: the speed is falling, so the object is slowing down (decelerating), still moving forwards until the speed reaches .
(a) False (b) True (c) True (d) False.
Question 5
A lift starts from rest and speeds up uniformly to m/s in s. It moves at m/s for s, then slows down uniformly to rest in s.
(a) Draw its speed-time graph.
(b) How far does the lift travel?
ShowHide solution
(a) Join , , and .
(b) The region is a trapezium with parallel sides (from to s) and , and height : m.
Check in pieces: m.
(b) m.
Question 6
A train travelling at km/h decelerates uniformly at m/s² until it stops.
(a) Change km/h to m/s.
(b) How long does it take to stop?
(c) How far does it travel while stopping?
ShowHide solution
(a) m/s.
(b) It loses m/s every second, so it takes s.
(c) Distance = area of the triangle m.
(a) m/s (b) s (c) m.
Question 7
A car starts from rest and accelerates uniformly to m/s in s. It travels at m/s for s, then decelerates uniformly to rest in s. It travels m in all. Find .
The sketch is not to scale.
ShowHide solution
Area
so and .
Check: m.
.
Question 8
A train starts from rest and accelerates uniformly to a speed of m/s in s. It keeps this speed for s, then decelerates uniformly to rest in s. It travels m in all.
(a) Find .
(b) Find its acceleration.
The sketch is not to scale.
ShowHide solution
(a) Area
, so .
(b) Acceleration m/s².
(a) (b) m/s², to 3 significant figures.
Question 9
In lesson 6.5, Example 5, a car starting from rest was metres from the start after seconds. Its speed-time graph for the same s is the straight line from to .
(a) Find its acceleration.
(b) Use the area under the speed-time graph to find how far it travels in the s, and compare with .
(c) Read its speed at and compare with the tangent in lesson 6.5.
ShowHide solution
(a) Acceleration m/s²: the car speeds up uniformly.
(b) Area m. From : m. They agree.
(c) At the speed is m/s, the same as the tangent's estimate in lesson 6.5. A straight speed-time graph rising from rest goes with a distance-time graph that curves upwards, getting steeper.
(a) m/s² (b) m, the same as (c) m/s, as the tangent gave.
Key Points
- On a speed-time graph a horizontal piece is a constant speed; at rest is speed , on the time axis.
- The gradient is the acceleration, in m/s². A falling piece has a negative gradient: a deceleration.
- The area under the graph is the distance travelled: rectangles, triangles and trapeziums, .
- Average speed = total distance ÷ total time.
- With an unknown time or speed, write the area with the unknown, make it equal to the distance, and solve.
- Change km/h to m/s (divide by ) before working with seconds.